eBay

【DIY Adjustable】: We offer a variety of sizes for you to choose from, and you can cut them according to the size of the original wiper. The installation of the wiper blade filler is very simple and quick, and it fits easily to the windshield surface. It is universal for most windshields of cars, buses, vans and trucks. Please check your size before you buy.
【Quiet & Noiseless】: The rubber strips is professionally treated with SPSN and molybdenum disulfide coating, so it may leave marks when your fingers wipe it. Don't worry. This coating provides lubrication and effectively reduces wear and noise. In addition, it can isolate the high temperature and prevent the deformation of the adhesive strip, which greatly enhances its scrapin effect.
【Durable Natural Rubber】: Our windshield wiper blade padding is made of natural rubber, which is flexible and made with micro-cut technology and very fine workmanship. Its surface is made of 5A grade anti-aging coating, and it is very smooth and textured. The durable material allows it to withstand exposure to the sun or other extreme weather without cracking easily.
【Essential Accessories】: We want you to know that windshield wipers are wearable parts. When it starts to scrape poorly it means the rubber strip is deteriorating. We recommend that you replace the rubber strip every 6-12 months to effectively extend the life of your wipers.
【Safer Driving】: A good wiper strip enables you to get a clear view when driving in rain or snow. You don't have to worry about traveling in bad weather, which greatly enhances your driving safety. If you have any questions, please feel free to contact us, we will reply as soon as possible.

Are you still struggling with your car wipers always not scraping clean? Always making annoying noise?

Sweetie! It's time to replace your wiper blade refill!

Specifications:

- Material: Rubber

- Color: Black

- Design: Three-dimensional layer

- Temperature Tolerance: +158F to -40F (+70C to -40C)

- Package Include: 4 x Windshield Wiper Blades Refills Rubber Strips

How to Install:

1. Raise the wiper arm off of the windshield to the locked position. (Notice how the blade is held in a steel channel & Notice the blade has a little wiggle room in the channel to slide from end to end )

2. Find the notch where the channel is wider for 1/2 inch about 1/2 inch from the bottom end. Push the old blade so it compresses and the end of the blade is in the notch and pull that end out of the channel and the blade pulls right out.

3. Insert the new blade all the way into the arm. Then eyeball the cut it so it will completely fill the channel, but you can cut it a little long at first and then make a few fine snips to get it right. Make it tad short so it has a little wiggle room. Lower the arm to window. Don't let it snap down onto the glass