Renogy 100W Monocrystalline Solar Panel
Output Cables: | 14 AWG (1.96ft long) | Cell Type: | Monocrystalline (6.5 x 3.3 in) |
Number of Cells: | 36 | Rated Waterproof Junction Box: | IP65 |
Rated Waterproof Solar Connectors: | IP67 | Maximum Power at STC: | 100W |
Cell Efficiency: | 22% | Optimum Operating Voltage (Vmp): | 20.4V |
Operating Temperature: | -40°F to 176°F | Optimum Operating Current (Imp): | 4.91A |
Open-Circuit Voltage (Voc): | 24.3V | Short-Circuit Current (Isc): | 5.21A |
Maximum Series Fuse Rating: | 15A | Certifications: | CE, ISO |
Weight: | 14.1 lbs/6.4 kg | Dimensions: | 41.8 x 20.9 x1.4 in |
Renogy Wanderer LI 30A PWM Solar Charge Controller
Nominal System Voltage: | 12V | Rated Charge Current: | 30A |
Max Gauge Size: | Up to 8AWG | Self-Consumption: | <10mA |
Max. PV Input Power : | 400W | Max. PV Input Voltage: | 25 VDC |
Working Temperature: | -20°F - 113°F | Dimensions: | 6.45 x 4.31 x 1.76 in |
Weight: | 0.65 lbs | Storage Temperature: | -31°F - 176°F |
High Voltage Disconnect: | 16V | Boost Duration: | 120 min |
Enclosure: | IP20 | Compatible bluetooth: | Renogy BT-1 Bluetooth module |
Temperature Compensation: | -3mV/°C/2V |
Renogy 8FT 10AWG Tray Cables (A Pair)
Voltage Rating: | 600/1000V | Length: | 8ft |
Wire Gauge: | 10AWG | Operating Temperature: | -40°F to +185°F |
Renogy Mounting Z Brackets(Set)
Long Cap Bolts and Four Short Bolts: | Eight | Spring Washers and Four Washers: | Four |
Z Shape Solar Panel Brackets: | Four | Nuts: | Four |
Renogy 20FT 10AWG Adaptor Kit (Pair)
Length: | 20ft | Wire Gauge: | 10AWG |
Rated Voltage: | 600/1000V | Operating Temperature: | -40°F to +185°F |
Renogy Solar Y Branch Connectors MMF+FFM Pair
Withstanding Voltage: | 1000V DC(TUV), 600V(UL) | Rated Current: | 50A |
Operating Temperature: | -40°F to 194°F | Flame Class: | UL94-V0 or UL94-5VA |
Contact Material: | Copper, Silver Plated | Insulation Material: | PC/PA |
Protection Degree: | IP67, mated | Protection Class: | Class II |
A solar panel has to be connected to a charge controller to regulate current, and a battery to store the electrical power. You will need adapter kit cables to wire the solar panel(s) and charge controller, and tray cables connecting the charge controller to a deep-cycle battery.
On-grid simply means solar power equipment (array or solar panel) is connected to the electrical grid, while off-grid refers to systems that are not connected to the grid and therefore store the generated power for later use. Off-grid systems are not affected by grid blackouts.
Solar panel performance may be hindered for a number of reasons. Most commonly environmental conditions such as indirect sunlight, temperature rise, cloudy sky, and dirt and stain build up on the top glass will cause a reduced power output.
The best way to gauge how many solar panels you need, is to understand and define the power load needed from this system. Power is measured in Watts, and capacity is commonly measured in Watt-hours (multiplying power output in watts by the required number of hours of operation multiplied by a safety factor of 1.5-2). Therefore, it is wise to size your battery bank first based on the minimum required capacity, and accordingly decide how many panels or how much power input is needed.
In order to determine what size solar kit is appropriate, you must first define the total load to be expected of the solar power system. Most manufacturers will publish a specification sheet of the AC unit online and will include a nameplate sticker on the AC body. Both can be used to determine the actual power rating of the AC. BTU is a common measuring unit for energy in AC and water heater products, however we are intrested in the energy rate, or simply power. Power will be listed in units of Watts, and can be used to determine the total load resulting from running the intended AC unit. Multiply the power rating recorded in watts by the total number of hours of operation intended, to obtain the total watt-hours. Divide the total watt-hours by the peak sun hours in the location of installation, and multiply by a safety factor of 1.5-2, to obtain the total number of watts your panels should produce to power the air conditioner load. The total power load can be divided by the power output of one panel to obtain the number of panels needed.
If you intend to use this solar power kit as a power supply for home appliances (e.g. coffee maker, TV, etc.), then you will need an inverter to convert the output voltage from a 12 VDC system to a 120V AC output socket. Renogy offers a variety of inverter products to suit your unique system and meet your power demand.
US$134.99
US$149.99 10%off
free shipping
US$151.99
US$189.99 20%off
free shipping
US$764.99
US$899.99 15%off
free shipping
US$212.99
US249.99 15%off
free shipping
Accurage description
Reasonable shipping cost
Shipping speed
Communication
Super fast shipping, fantastic price on a flash sale, the second one I purchased.
Renogy 3000W 12V Pure Sine Wave Inverter 3000W Solar Power Battery Converter RV (#203530677542 )
Fast shipping and great price!
Renogy 3000W 12V Pure Sine Wave Inverter 3000W Solar Power Battery Converter RV (#203530677542 )