eBay

Product Description

4-in-1 Security Dome Camera

Press OSD joystick to switch the output mode:

Default / UP for 5 seconds: CVBS 960H
Right for 5 seconds: TVI
Down for 5 seconds: CVI
Left for 5 seconds: AHD

ZOSI 1080P 4-IN-1 Security Wired Camera

Camera Specification

Noted:

this is a wired security camera, and it could be the additional or replacement camera for the wired security system.

Image Sensor: 1/3〞CMOS CMOS with IR-Cut.
Active Pixels: 1920(H)×1080(V).
Lens: 3.6mm
IR LEDs Amount: 24pcs, 5mm LEDs
IR Distance: up to 80ft.
Viewing angle:90 degree
Weather - Resistant
Singal mode: TVI / AHD / CVI / CVBS 960H.

ZG4182C works with CVBS TVI CVI AHD security DVR

This 1080p full HD camera has a built-in OSD menu that can change the 4 different video outputs：HD-TVI, AHD, CVI, and CVBS(960H)， and adjust the video settings.

Operation Mode：

Switch from AHD: Press Leftward for 5 Seconds

Switch from TVI: Press Rightward for 5 Seconds

Switch from CVBS: Press Upward for 5 Seconds

Switch from CVI: Press Downward for 5 Seconds

Noted: Default Video Mode is Analog 960H Mode


1080p Full HD See everything in details with true 1080p HD resolution. Get clearer and smoother images/videos than 720p cameras.	Clear Night Vision Equipped with 24pcs infrared LEDs, this camera can see up to 80ft in darkness. 3.6mm HD lens with IR-CUT captures clear image and video at night.	Flexible Installation Mount this camera on the ceiling or on the wall. It’s simple to place it anywhere indoor and outdoor for all-round surveillance.

3.6mm lens & 24pcs leds, up to 80ft night vision

Troubleshooting

Q: Video Loss appears where the image from my camera should be displaying on my DVR?

A: 1.Check the extension cable (power and video) is securely connected to the camera.

2.Check the video output from the camera is securely connected to a video input channel on the DVR.

3.Check the power from the camera is securely connected to a power supply.

4. The camera mode do not match your DVR.there is 2 ways to setup . (1) Press OSD Joystick “DOWN” 5 seconds,if still no picture come, try to press “LEFT” “RIGHT””UP” for 5 second, till the signal matching your DVR. (2) Make sure the signal of your DVR, Use OSD Joystick to change the mode of the camera according to your DVRs video Mode.

Product Description

4-in-1 Security Dome Camera

ZOSI 1080P 4-IN-1 Security Wired Camera

Camera Specification

1080p Full HD

Clear Night Vision

Flexible Installation

Troubleshooting