NEW JK-560S Walkie Talkie Frequency Counter Detector Reader 1-30w 100-520mhz CTCSS/DCS Meter Power Measurement Transmission Connector
This frequency counter can continually test the analog radio signal (handhold radio,wireless phone, etc ) and digital radio signal, to display the frequency parameter with the signal strength.This is the best tools for the signal testing and radio maintenance.
Characteristics:
1. Frequency step: 200 K (digital radio signal), 1 K, 100 Hz.
2. Test range: UHF: 8 m, VHF: 5 m.
3. Test range: 100-520 MHZ
4. Antena: removing antenna
5. Battery: 9V 6F22
6. Auto timeout: 1 min. (Except for the digital gear signal)
Operation: the only button with all functions
The 1st pressing to turn on
Welcoming >>> Release the button return to powering off mode
>>> continually pressing
to choose the 200k step—release button , 200k mode for digital radio
>>> continually pressing
to choose the 1k step -- release button , 1k mode for faster testing
>>> continually pressing
to choose the 100Hz step - release button, 100Hz mode for accurate testing
Instructions:
1. When the frequency counter and the walkie-talkie are turned on at the same time, press and hold the walkie-talkie launch button for 1-5 seconds to display the frequency and muting.
2. It is necessary to use the attached cable and adapter to connect the walkie-talkie and the frequency counter. Press and hold the walkie-talkie launch button to measure the specific power value of the walkie-talkie.
3. Long press the power button to turn on/off
4. Long press the power button in the off state can switch 1K or 0.1K display mode.
5. Quickly press the power button to reset (retest).
Package Includes:
1 x JK-560S Frequency Counter
1 x Antenna
1 x Connection Cable
1 x USB Cable
1 x US Plug