Feature:
Application: LED headlights for electric bicycles, shared electric vehicles, and motorcycle
Package Weight: about 0.65KG (small carton)
Work status description:
Driving lights: When the switch of driving lights is turned on, the headlights and tail lights are on
Horn: When the horn button is pressed, the horn starts to work, release it to cancel
Brake light: When the brake signal line and the controller brake low voltage signal are connected normally, the brake light will light up while braking, and the brake light will go out when the brake is cancelled
Turn signal: When the turn switch of the designated direction is toggled, the turn signal of the corresponding direction starts to work and flashes, the flashing frequency is about 800ms each time
If your bicycle is inconvenient to install the taillight, the taillight bracket will easily solve the installation problem
Headlight:
1. Net weight of headlight: 100g
2. Shell material: plastic
3. Adaptable voltage range: 12V-60V
4. Power: 59mA/2.8W
5. Luminous flux: 180-220LM
6. Speaker power: 44mA/2.1W
7. Speaker volume: 80-100dB
8. Wire sequence: Red-Horn+ Black-GND Green-Lamp+
9, CQC certification: CQC19134228086
10. Product size: 62*50*70mm
11. Line length: about 1.5M
Taillight:
1. Net weight of tail light: 120g
2. Shell material: plastic
3. Applicable voltage range: 12-80V
4. Power: 1.5W
5. Number of light sources: 14
6. Luminous flux: 15LM
7. Line sequence:
Tail light power = red + / black -
Brake light power supply: blue+/white-
Turn signal: yellow right+/green left+
8. Product size: 132*65*40mm
9, CQC certification: CQC19134228085
10. Cable length: about 1.5M
Switch:
1. Net weight of switch: 92g
2. Shell material: plastic
3. Line sequence:
white = running light output +
red = power input +
Yellow=Speaker output+
Product size: 26*53*61mm
Cable length: about 1.5M
Light Set Connection Wire:
1. Product net weight: 13g
2. Wire specification: 22AWG high temperature resistant soft silicone wire
3. Length after folding: 140mm