This connector kit allows for quick and convenient connect/disconnect of power from a winch or from another electrical devices such as a remote battery charger, trailer, etc. It is made of durable polycarbonate allowing for over 10,000 connect/disconnect actions. The bottom of the devise features a fitted rubber boot to protect against dust, moisture and corrosion

Both ends are suitable for connection to the power or load side because of its identical connectors. The ends are made to connect only one way, making it

impossible to connect the wrong polarities to one another. The connectors are ideal for 12-36 volts DC low-voltage and direct current use

The heavy duty components are ideal for low or medium current use. Featured with 0.25" inner diameter, the terminal pins accept wire 6AWG, 8AWG, 10-12AWG

It is very easy to use and install. Insert the wires into the terminal pins, then solder or crimp them. Insert the terminal pins into the connector housing and lock them in place

 

Specification:

- Color: Red

- Plug: Polycarbonate

- Contact material: Copper, silver plating

- Rated Current (Amperes): 50A

- Rated Voltage (Voltage): 600V

- Contact Barrel Wire Size: 6/10/12AWG (13.3mm⊃2; - 5.3/3.3mm⊃2;)

- Maximum Wire Insulation Diameter:0.44 (inches),11.2(mm)

- AVG Contact Resistance:200(micro-ohms)

- Contact Retention Force :50 (lbf)

- Average contact resistance: 0.05MΩ

- Voltage proof: 2200V (DC)

- Insulation resistance: 500MΩ

- A. No load (Contact/Disconnect Cycles): To 10,000

- B. Under load (Hot Plug 250cycless120V): 50A

- Avg. Unmating Force: 53N

- Flammability Rating of Housing Material: UL94 V- 0

- Operating temperature range: -20°to 125°

Weight: 40g

 

What is included:

4 x Connectors

8x Terminal pins

4 x Rubber boot caps

PushAuction