Midi Controller 3 Axis Joystick with USB C interface 2 Program Dual Mode controller plus 4 rotary encoders with Triggers plus 4 trigger buttons for DAW transport controls. Rotary encoders can output absolute or relative MIDI CC. Encoder mode can be independent in Pairs from each other. MIDI DIN serial output

for direct control of keyboards.

The Stone is designed with capability in mind.

If you need to control Kontakt, a keyboard or a DAW, the dual output rotary encoders have you covered.

Tested and works on USB 2.0 and above Windows and Apple machines and devices. Devices must be able to supply enough power or you will need to use a powered USB hub. The hub is mostly needed for portable devices like iPads. Mac Pro may require a mac cable. (not included)

This is a custom made controller with a 3D printed resin body that has the appearance of coal.

The electronics are built on a Sparkfun Pro Micro USB C microcontroller. When plugged in it will be seen as "MIDI ROCK Joystick". It will load as a MIDI Controller. No extra drivers needed.

Custom programming lets you change from a pitch bend / modulation control to a vector control all in one joystick at the touch of a button. Normal operation in PB/Mod then push top button to control vector controls, or any programmed CC controls, and when the button is released the vector controls will stay in place. You could also program it without PB/Mod and have 2 banks of any CC controls for a total of 6 controls.2 programs let you control up to 12 CC controls on 1 joystick. Great for video an lighting also.

Standard Joystick operation PLUS a third twisting control. ( This is a center return joystick )

Axes, MIDI channel and button can be custom programmed before shipping.

Program 1

Normal mode:

Forward = Pitch Bend

Side = Modulation

Twist = Pan

Alternate mode:

Forward = CC 16

Side = CC 17

Twist = CC 18

Program 2

Normal Mode:

Forward = CC 19

Side = CC 20

Twist = CC 21

Alternate mode:

Forward = CC 22

Side = CC 23

Twist = CC 24

Rotary Encoders:

Absolute Mode = CC 25, 26, 27 28

Relative Mode = CC 29, 30, 31, 32

Push Button: Mode Switch

Key Buttons : 81, 82, 83, 84, 85, 86, 87, 88

Potentiometer = CC 9

MIDI channel 1

Push Button colors: Yellow, Blue, White and Black

Potentiometer Knob end color is red.

Can be custom programmed to any combinations of controls needs before shipping. Great for lighting and video control also.

These are custom made in the USA.

Message us with any questions or for a virtual demo.