Full Systems Diagnoses for BMW Vehicle Systems on the ECUs

LAUNCH Creader Elite automotive scanner can scan 120+ modules same LAUNCH X431 like ECM(engine), TCM(Transmission), ABS, SRS(Airbag), Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(Heat, Ventilation and Air Conditioning), TPMS(Tire Pressure Monitor System Reset), Radio, EPB and so on to perform OE level diagnostics to read and clear codes, view live data stream, perform active tests, and retrieve ECU information, allows you to get a faster and more accurate test result on all electronic systems.

[Health Report Share & Print ] ALL MODULE Diagnosis Health Report Share & Print – ALL MODULE Diagnosis automatic diagnostic scanning tool enables diagnostic technicians to generate diagnostic reports before and after car diagnosis and repair service, so that the diagnostic reports can be printed out or sent to customers through the Internet (email) and compared or shared with customers.

[Plug and Play] Plug the diagnostic cable into the vehicle's DLC port, the screen of Launch Creader Elite for BMW will automatically light up and turn on. It is very convenient.

[Diagnostic History] This car diagnostic scanner records the every details of diagnostic session, provides a quick access to the tested vehicles, and enables users to choose to view the test report or resume from the last operation, without the necessity of starting from scratch, you can record/ review/ playback live data anytime.

[Diagnostic Report] Once the diagnostic process is successfully finished, a diagnostic report will be automatically generated and sent to your mailbox. You can download it, and then print it to share it with others.

[Diagnostic Feedback] LAUNCH TECH’s engineers will help you troubleshoot problems. Customized exclusive beta version software for your car can be obtained here.

[Screen Snapshot] Snapshot graphing shows you any failures or glitches at a glance, you can share it via email to ask for help.

[4 in 1 Live Data Stream] There are 3 ways to view the data, you can choose the one that suits you best. Value–it is the default mode that displays the parameters in texts and shows them in list format. Graph–displays the parameters in waveform graphs. Combine–this is the most used in graph merge status for data comparison. In this case, different items are marked in different colors. (Combine up to 4 options)You can also record the data stream and playback the data.

[Supported 11 Languages] English, French, Spanish, German, Russian, Italian, Portuguese, Japanese, Korean, Chinese Traditional, Polski. If you feel more comfortable with your native language, you can switch back and forth as necessary without encountering any sort of language barrier.

[DCT Lookup] DTC Lookup is used to search for definitions of DTCs stored in the DTC libraryand for code breaker information, and Code Breaker is used to provide descriptions of DTCs and helpful tips to deal with DTCs.It is useful for technicians to find the root cause of trouble code faster, saving diagnosis and repair time.

[Single Serie Diagnostic Tool] Newest Launch Scan Tool suitable for series car like (for) BMW/ MINI/ Rolls Royce... OBDII cars from 1996-2021, 1994-1996 OBDI cars need to purchase extra connecting line.

LAUNCH X431 Creader Elite For BMW Supports 31+Reset Function :

1.EPB Reset (Electronic Parking Brake Reset) : After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.

2.Oil Lamp Reset : Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.

3.SAS Reset (Steering Angle Calibration Reset) : Learn to correct the angle and solve the problem of the steering angle of the steering wheel.

4.BMS Reset (Battery Register / Battery Maintenance) : Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery.

5.ABS Brake Bleeding : When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.

6.ETS Reset (Electronic Throttle Position Learn/Throttle Matching) : After the engine has been working for a long time, there will be serious carbon deposits in the throttle, which will affect the intake. After cleaning or replacing the throttle, the throttle opening cannot match the original ECU. This is to allow the ECU to enter Throttle learning status, let the ECU re-match the throttle opening.

7.TPMS Reset (Tire Pressure Monitor System Reset) : When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle’s ECU, reset tire pressure and turn off the tire pressure MIL.

8.GEAR Reset (Gear Learning) : The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.

9.Injector Reset (Injector Coding) : The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.

10.AFS Reset (Adaptive Frontlighting System) : It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body. 

11.Intelligent Cruise Control, 12.Engine Power Balance Moonitoring, 13.Motor Angle Calibration, 14. Head Light Fitting, 15.Seat Matching/Calibration, 16.Door and Window Initialization Study/Calibration, 17.Sunroof Initialization, 18.Air Suspension Matching, 19.Gearbox Matching, 20.Injector Calibration, 21.Multimedia Video Reset, 22.Cluster Reset, 23.Tire Change Reset, 24.Key Programming, 25.Coolant Bleed, 26.NOx Sensor Reset, 27.Stop/Start Reset, 28.Transport Mode, 29.Adblue Reset, 30.A/F, 31.A/C Relearn, more and more function will be kept growing and optimized constantly.  
and more.....

ECU CODING Customize Your Car Easily !

ECU Coding: Every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH Creader Elite for BMW is equipped with advanced ECU coding function same as X431 for addressing the following issues :

After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.
ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.

LAUNCH X431 Creader Elite For BMW Supports Full 10 OBD2 Function :

This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:

1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.