MS200 NIBP Simulator

               

Introductions

MS200 NIBP Simulator

Introduction

It is a multi - purpose test device for testing NIBP Monitor adopted Oscillometry. Concise and elegant in appearance, easy and convenient to operate, and it can generate the pressure up to 400mmHg (53.3 kPa) by the built-in air pump. With the functions of dynamic BP simulation under several conditions, static pressure calibration, automatic leak test and over-pressure relief test, which can quickly and accurately analyze each performance of NIBP Monitor.

Functions

1)Pressure leak test

2)Over-pressure relief test

3)BP simulation under standard condition

4)BP simulation under patient condition

5)BP simulation under arrhythmia condition

6)BP simulation under respiratory interference condition

7)BP simulation of neonate

8)Wrist BP simulation

9)User-defined BP simulation

10)System setting function.

11)The parameters set can be stored.

12)ON/OFF function

13)Dynamic BP simulation

Performance

BP simulation range:

Systolic pressure: 2.7 kPa (20 mmHg) ~ 40.0 kPa (300 mmHg)

Diastolic pressure: 1.3kPa (10 mmHg) ~ 33.3 kPa (250mmHg)

Pulse volume: 0.1 cc ~ 2.4 cc  

HR range: 30 bpm ~ 250 bpm; pulse volume > 2.00 cc, maximum HR: 200 bpm

HR accuracy: ± 1 bpm (except patient condition, arrhythmia and respiratory disturbance)  

Under patient condition:

Weak pulse, tachycardia, obese, geriatric:   ±（preset value 1%+1）bpm

Moderate exercise:                     ±（preset value 1.5%+1）bpm

Strenuous exercise:                    ±（preset value 3%+1）bpm

Pressure measurement:

Range: 0kPa (0 mmHg) ~ 53.3 kPa (400 mmHg)

Resolution: 0.1 kPa, 1 mmHg, 1 cmH2O, 1 inH2O, 0.1 psi

Accuracy:

0 kPa (0 mmHg) ~ 40.0 kPa (300 mmHg), ± (0.5 % of reading + 0.1) kPa or ± (0.5% of reading +1) mmHg

40.1 kPa (301 mmHg) ~ 53.3 kPa (400mmHg), ± 2% of reading

Pressure leak test

Generate a pressure up to 400 mmHg by the built-in air pump. It always displays the peak pressure and the real-time pressure. Leak rate is displayed after 10 seconds.

Over-pressure relief test

Generate a pressure up to 400 mmHg by the built-in air pump, it displays peak pressure.

Pressure source:

Output range: 6.7 kPa (50 mmHg) ~ 53.3 kPa(400 mmHg)

Resolution: 0.1 kPa, 1 mmHg, 1 cmH2O, 1 inH2O, 0.1 psi

Deviation between target pressure and actual pressure: ± 1.3 kPa (± 10 mmHg) in range of 13.3 kPa (100 mmHg) ~ 53.3 kPa (400 mmHg) with a minimum volume of 300 cc

Airtightness

Total airtightness: < 0.3 kPa/min (2.25 mmHg/min) under “OFF” state

Airtightness of built-in cuff: 0.27 kPa/min (2 mmHg/min)

BP simulation preset value configuration table

BP simulation BP preset value BP HR Pulse volume

Standard BP simulation #1 120/80（93） 80bpm 0.68cc

#2 150/100（116） 0.65cc

#3 200/150（166） 0.60cc

#4 255/195（215） 0.55cc

#5 60/30(40) 0.75cc

#6 80/50（60） 0.71cc

#7 100/65（76） 0.69cc

BP simulation under patient condition

Healthy heart 120/80(93) 75bpm 0.68cc

Weak Pulse 110/80(90) 95bpm 0.50cc

Mild Exercise 140/90(106) 120bpm 1.00cc

Strenuous Exer 140/90(106) 162bpm 1.40cc

Obese 120/80(93) 90bpm 0.50cc

Geriatric 150/110(123) 95bpm 0.40cc

Tachycardia 120/105(110) 130bpm 0.40cc

Bradycardia 120/60(80) 45bpm 1.10cc

BP simulation under arrhythmia condition

Premature Atrial Contraction1 138/53(81) 80bpm 0.70cc

Premature Atrial Contraction2 144/64(90) 83bpm

Premature Ventricular Contraction 118/61(80) 83bpm

Atrial Fibrillation and PVC 139/72(94) 91bpm

BP simulation under respiratory interference condition

spontaneous breathing1 138/65(89) 104bpm 0.60cc

spontaneous breathing2 149/65(93) 105bpm

spontaneous breathing3 112/47(68) 86bpm

controlled breathing 132/44(73) 98bpm

BP simulation of neonate

#1 35/15(22) 120bpm 0.11cc

#2 60/30(40) 0.10cc

#3 80/50(60)

#4 100/70(80)

BP simulation of wrist cuff

#1 120/80(93) 80bpm 0.50cc

#2 160/100(120)

#3 80/55(63)

User-defined BP simulation[1] - - - -

Note[1]：Support 9 user-defined BP simulation modes. The following parameters can be defined by users:2.3.1.The value of diastolic pressure should be lower than systolic pressure, pulse volume and HR can not be set to the highest values (e.g., pulse volume ≤ 2.00cc, HR: 250 bpm; pulse volume > 2.00cc, HR: 200bpm).

Accessories

One User Manual

Two fuses

One power cord

Physical characteristic

Display: 4.3" 65 K color LCD display

Power supply: AC100 ~ 240 V   50/60 Hz, <60 VA

Environment temperature: + 5 ℃ ~ + 40 ℃

Relative humidity: < 90 %, non-condensing

Altitude: ≤ 3000 m

Atmospheric pressure: 80 kPa ~ 106 kPa

Dimension: 207 (L) × 220 (W) × 121 (H) mm

Weight: about 2.1 kg