Lenovo ThinkSystem D2 2U Chassis + 4x SD530 Server Nodes 8x Bronze 3204 256GB RAM

Chassis Model: D2
Node Model: SD530

In Good Condition, Full Working Order
Tested
2 Year Warranty
Includes 8x Heatsinks, 2x Power Supply, 4x Caddies (1-Per Node)
Rails Included


Included: 
SD530 Server Specification:
  • Machine type: 7X21
  • Form factor: Half-wide, 1U compute node. Optional GPU Tray adds 1U.
  • Supported chassis:
    • ThinkSystem D2 Enclosure, 2U high; up to 4 servers per chassis.
    • ThinkSystem Modular Enclosure, 2U high; up to 4 servers per chassis.
  • Processor: One or two second-generation Intel Xeon Processor Scalable Family of processors (formerly codename "Cascade Lake"). Supports processors with up to 28 cores, core speeds up to 3.8 GHz, and TDP ratings up to 205W. Two Intel Ultra Path Interconnect (UPI) links at up to 10.4 GTps each.
  • Chipset: Intel C624 "Lewisburg" chipset
  • Memory:
    • Configurations with some processors: Up to 16 DIMM sockets (8 DIMMs per processor)
    • Other configurations: Up to 12 DIMM sockets (6 DIMMs per processor)
    • DIMM slots are shared between standard system memory and persistent memory. Supports Lenovo TruDDR4 DIMMs at 2933 MHz or 2666 MHz. RDIMMs, LRDIMMs and 3DS RDIMMs are supported (RDIMMs currently only available), but memory types cannot be intermixed.
  • Persistent memory:
    • Supports up to four 2666 MHz Intel Optane DC Persistent Memory modules (DCPMMs) installed in the DIMM slots. Only supported with processors that have a heatsink that enables 16 DIMM slots. Persistent memory is installed in combination with system memory DIMMs.
  • Memory maximums:
    • With system memory DIMMs only:
      • With 16 DIMM slots: Up to 2 TB with 16x 128GB 3DS RDIMMs and two processors
      • With 12 DIMM slots: Up to 1.5 TB with 12x 128GB 3DS RDIMMs and two processors
    • With Persistent Memory in memory mode (requires 16 DIMM slots): Up to 2 TB of Persistent Memory with 4x 512GB Intel Optane DC Persistent Memory modules and two processors (1TB per processor)
    • With Persistent Memory in AppDirect mode (requires 16 DIMM slots): Up to 2.75 TB total memory (2TB of Persistent Memory using 4x 512GB DCPMMs + 768 GB of system memory using 12x 64GB RDIMMs) with two processors (1.375 TB per processor)
    • Note: Support for more than 1TB of memory per processor (more than 2TB per server) requires M-suffix processors. These calculations include any Persistent Memory installed.
  • Memory protection: ECC, SDDC (for x4-based memory DIMMs), ADDDC (for x4-based memory DIMMs, requires Intel Xeon Gold or Platinum processors), memory mirroring, and memory sparing.
  • Storage bays: Up to six 2.5-inch hot-swap drive bays. Depending on the drive backplane selected, the supported drives can be SAS, SATA or NVMe drives. Up to four NVMe drives can be installed with a suitable drive backplane. Also supports one or two M.2 drives installed internally to each node. Other configurations exist including the substitution of a KVM Module in one drive bay for keyboard, video and mouse support.
  • Maximum internal storage:
    • 184.32TB using 6x 30.72TB 2.5-inch SAS/SATA SSDs
    • 30.72TB using 4x 7.68TB 2.5-inch NVMe SSDs
    • 14.4TB using 6x 2.4TB 2.5-inch HDDs
  • Storage controller: Onboard 6 Gb SATA using embedded Intel RSTe software RAID, supporting RAID 0, 1, 10, 5,50. Optional 12 Gb SAS/SATA RAID using SAS3408-based cacheless RAID controller, supporting RAID 0, 1, 10, 5. Optional 12Gb SAS/SATA HBA.
  • Optical drive bays: No internal bays; use an external USB drive.
  • Tape drive bays: No internal bays. Use an external USB drive.
  • Network interfaces: Two 10 Gb interfaces, either 10GBASE-T ports (RJ-45) or SFP+ ports, routed through the Ethernet I/O Module at the rear of the enclosure. Networking ports are based on the Intel Ethernet Connection X722 in the chipset of the SD530 node.
  • PCI Expansion slots:
    • One or two PCIe 3.0 slots:
      • One PCIe 3.0 x16 low-profile slot, or
      • Two PCIe 3.0 x8 low-profile slots
    • Additional slots with the optional GPU Tray:
      • Two PCIe 3.0 x16 full-length double-width slots
  • Ports: Front: Optional KVM Breakout Module providing one USB 3.0 port, one micro USB port for XClarity Controller connectivity, and a KVM connector port for a breakout cable that provides one VGA port, two USB 2.0 ports and one DB9 serial port for local connectivity. Additional ports provided by the enclosure as described in the Enclosure specifications section.
  • Cooling: Supplied by the D2 Enclosure.
  • Power supply: Supplied by the D2 Enclosure.
  • Hot-swap parts: HDDs and SSDs
D2 Chassis Specification:
  • Machine type:
    • 7X20: D2 Enclosure (ships with single port SMM)
    • 7X22: Modular Enclosure (ships with dual port SMM)
  • Form factor: 2U rack-mounted chassis.
  • Server support: Up to 4 servers per chassis.
  • Servers per 42U rack: Up to 84 servers in 21 enclosures
  • System Management Module:
    • D2 Enclosure: Single port SMM is standard, supports Dual Port SMM as a field upgrade
    • Modular Enclosure: Dual Port SMM is standard
    • The hot-swappable System Management Module (SMM) is the management device for then enclosure. Provides integrated systems management functions and controls the power and cooling features of the enclosure. Provides remote browser and CLI-based user interfaces for remote access via the dedicated Gigabit Ethernet port. Remote access is to both the management functions of the enclosure as well as the XClarity Controller (XCC) in each server. Supports the SMM with one Ethernet port (D2 Enclosure) or the Dual Port SMM with two Ethernet ports (Modular Enclosure, or the D2 Enclosure with the Dual Port SMM installed). The Dual Port SMM allows a single incoming Ethernet connection to be daisy chained across 7 enclosures and 28 servers, thereby significantly reducing the number of Ethernet switch ports needed to manage an entire rack of SD530 servers and enclosures.
  • Ethernet I/O Module: 8-port Ethernet I/O Module (EIOM) routes two 10 GbE connections to each of the four servers.
  • Controls and LEDs: SMM has four LEDs: system error, identification, status, and system power. Each power supply has AC, DC and error LEDs
  • Power supplies: Two hot-swap power supplies either 1100 W, 1600 W, or 2000 W functioning as a redundant pair. Power supplies must be identical. Power supplies require a 200-240 V ac, 50 or 60 Hz supply, although the 1100 W also supports 100-127V ac 50 or 60 Hz. Power supplies are installed at the rear of the chassis. 80 PLUS Platinum certified. Built-in overload and surge protection.
  • Cooling: Five hot-swap system fans, accessible via removable panel in the top cover of the enclosure.
  • Hot-swap parts: Power supplies, fans, System Management Module
  • Power consumption: Input kilovolt-amperes (kVA): minimum: 0.153 kVA, maximum: 2.61 kVA
  • Dimensions: 2U chassis. Height: 87 mm (3.5 inches), depth: 892 mm (35.1 inches), width: 488 mm (19.3 inches)

We can supply this server with a different specification to suit your requirements; more or less memory, different or additional hard drives, additional network cards etc. Please contact us for a quote.

VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£2040 excluding VAT

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK
CS See RJ -43 dup dup cto dup .com