Bostik Express Pointing Mortar has been specially developed to quickly repair damaged masonry joints in brick and stonework, without having to mix mortar. It can also be used to seal between stones, brick slips and around lead flashing.
It is supplied ready to use and is easily applied with a cartridge gun, internally or externally. It does not require a primer on most substrates, even on slightly damp surfaces. It can be overpainted where required.
- Ready to use, quick and easy to apply with a cartridge gun
- Produces durable, weather resistant joints
- Overpaintable with water based & synthetic paints
Coverage
6 linear metres (approx.) per cartridge of joint 10mm in height x 5mm depth
Drying times
Working time: up to 10 minutes
Surface set: 5 hours
Full cure: cures at 2mm per 24 hours (23°C @ 50% RH) (depending on joint thickness and drying conditions, low temperatures and/or wet weather will extend drying times)
Cleaning
Clean tools and equipment with warm water immediately after use. Dried product can only be removed mechanically
Storage/Shelf Life
Store for up to 12 months from date of manufacture in original, unopened packaging in cool, dry conditions within the temperature range +5°C to +25°C, out of direct sunlight and away from sources of heat and ignition. Protect from frost.
Precautions
Bostik Express Pointing Mortar is not suitable for continuous exposure to water. It is not suitable for PE, PP, PMMA, PTFE, soft plastics, neoprene and bituminous substrates or for movement joints.