• Item-condition
  •  

    • Fits 1999 2000 2001 2002 Infiniti G20 Rear Shocks Struts

    Item-condition

     

    • 100% brand new in factory original condition. Never been used or installed.
    • Enhances overall handling, safety and performance of your vehicle.
    • OE Quality TS16949 certified.
    • Top Quality JAPANESE MADE OIL PISTON SEALS!
    • Pressurized N2 gas to reduce foaming and aerating. Also to ensure product better performance.
    • Effectively to reduce the effect of traveling over rough ground.
    • Seamless cylinder & sleeves to reduce the possibility of splitting to ensure close contact between the piston & cylinder no leaks to obtain stable damping force.
    • precision robotic welding in most of the applications.
    • Powder-coated finish for corrosion resistance and long time service.
    • Hard chromed piston rod micro-cracks chromed surface processed & ultra-precision vertical polishing to ensure smooth contact between the piston rod & seal.
    • Buckle holes are consistent with the original car in situ for easy & quick installation without any changes.
    • Newer valving technology operates in stages based on the velocity of the car.
    • Stock in USA, 1 year warranty.

     

    Compatible with the following vehicles

     

    1991-2002 Infiniti G20 Rear Left /Right

     

    Package Included:

     

    2X Shocks Struts  （Front Left Right）

     

    NOTE: Look just above this product description (Item Specifics) for all part numbers and placement on vehicle.Please check your model carefully to avoid unnecessary trouble​

     

    HOW TO INSTALL :

    Step 1: Before you lift the vehicle, loosen lug nuts one full turn.
    Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.
    Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help
    keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt 
    Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.
    Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need
    replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc). 
    Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)!
    Opening brake lines will require bleeding of the brake system.
    Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in
    expensive and time consuming repairs.
    Step 7: Remove sway bar attached to the strut assembly or control arm.
    Step 8: Remove the tie rod (only if it attached to the body of the strut, if not leave it attached to the steering knuckle).
    Step 9: Remove the strut to knuckle bolts at the bottom of the strut. On some vehicles, the brake caliper and rotor
    may need to be removed to gain access.
    Step 10: Remove the upper mounting plate bolts located in the engine or trunk compartment. Do not remove the
    center retaining nut! It is not safe to unload the spring from the assembly in this position.
    Step 11: Carefully remove the old strut assembly from the vehicle. Be very cautious not to let the strut "drop" down
    on your brake line, rotor or drum.
    Step 12: Install the new Complete Strut Assembly in the reverse order as above (steps 11-6). Using an anti-seize
    compound on all fasteners is suggested.
    Step 13: Carefully double check your work and make sure everything is tightened to manufacturers torque specifications.
    Step 14: Replace the tire the rotor and tighten to manufacturers torque specifications.
    Step 15: Slowly lower the vehicle down after removing the jack stands. Pay very close attention to any odd sounds
    when the vehicle is lowered onto the new Complete Strut Assemblies. 
    Step 16: It is very important that you immediately "road test" your vehicle right away to ensure that installation was done properly.
    Listen and feel for common signs of incorrect installation while driving slowly over speed bumps, rough road or potholes.

     


    Item Specifics
    Brand CLASSIC-AutoParts
    Manufacturer Part Number C995047APS
    Type Strut
    Fitment Type Direct Replacement
    Placement on Vehicle Left
    Manufacturer Warranty 1 Year
    Features Sealed
    Modified Item No
    Adjustable No
    Gas Charged Shock Yes
    Interchange Part Number CB341194
    Other Part Number CB71278
    Kit or Single Part Kit
    Kit Parts Included Set of two rear struts
    Surface Finish Powder Coat
    OE Spec or Performance/Custom OE Spec
    Color Gloss Black
    Return Policy Free return or replacement within 30 days
    Shock Absorber System Double Pipe
    Shock Absorber Type Gas
    Vintage Part No
    Material Steel
    Mounting Style Screw-On
    Performance Part No
    Quantity 2Pcs
    Superseded Part Number Shock and Strut
    Universal Fitment No
    Compressed Length 11.180"(R)
    Travel Length 5.490"(R)
    Included Hardware Mounting Hardware
    Item Length 16.670"(R)
    Package Dimension (in.) 17.72*7.87*3.94
    Gross Weight (LB) 8.069
    Package Dimension (in.) 17.72*7.87*3.94
    Gross Weight (LB) 8.069

    Payment
    1.We only accept PayPal.
     
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    3.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
    Shipping
    1.All the orders are shipped from USA warehouse.
     
    2.Orders processed within 24 hours of payment verification.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns
    1.30 days return offered for BRAND NEW items only, it starts from the day you received it.
     
    2.All returned items should be in the original packaging and you need to provide us with the shipping tracking number, specific reason for the return, and your eBay ID.
     
    3.We will charge 20% restocking fee of paid price if the return is due to buyer's misitake.
    Contact Us

    If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

    Feedback

      We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Store Category
     Store Home
     Horns
     Dipstick
     Removal-Unlock tool
     Battery Switch-Relay
     Lift Support
     Air suspensions
     Steering Knuckle
     snorkel air intake
     complete struts
     Cylinder Piston Kit
     Strut Mount
     coilover
     Shocks & Struts
     Air Ride Suspension Valve
     Motorcycle Exhaust Pipe
     Power Brake Booster
     Bumper
     Engine Splash Shield
     Strut+Suspension+Bearing
     Brake caliper
     Brake system
     Fuel System
     Other
    Hot Item
    Fast and Free

    content_src_url

    Best seller

    content_src_url
    Fits 1999 2000 2001 2002 Infiniti G20 Rear Shocks Struts

    Item-condition

     

    • 100% brand new in factory original condition. Never been used or installed.
    • Enhances overall handling, safety and performance of your vehicle.
    • OE Quality TS16949 certified.
    • Top Quality JAPANESE MADE OIL PISTON SEALS!
    • Pressurized N2 gas to reduce foaming and aerating. Also to ensure product better performance.
    • Effectively to reduce the effect of traveling over rough ground.
    • Seamless cylinder & sleeves to reduce the possibility of splitting to ensure close contact between the piston & cylinder no leaks to obtain stable damping force.
    • precision robotic welding in most of the applications.
    • Powder-coated finish for corrosion resistance and long time service.
    • Hard chromed piston rod micro-cracks chromed surface processed & ultra-precision vertical polishing to ensure smooth contact between the piston rod & seal.
    • Buckle holes are consistent with the original car in situ for easy & quick installation without any changes.
    • Newer valving technology operates in stages based on the velocity of the car.
    • Stock in USA, 1 year warranty.

     

    Compatible with the following vehicles

     

    1991-2002 Infiniti G20 Rear Left /Right

     

    Package Included:

     

    2X Shocks Struts  （Front Left Right）

     

    NOTE: Look just above this product description (Item Specifics) for all part numbers and placement on vehicle.Please check your model carefully to avoid unnecessary trouble​

     

    HOW TO INSTALL :

    Step 1: Before you lift the vehicle, loosen lug nuts one full turn.
    Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.
    Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help
    keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt 
    Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.
    Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need
    replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc). 
    Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)!
    Opening brake lines will require bleeding of the brake system.
    Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in
    expensive and time consuming repairs.
    Step 7: Remove sway bar attached to the strut assembly or control arm.
    Step 8: Remove the tie rod (only if it attached to the body of the strut, if not leave it attached to the steering knuckle).
    Step 9: Remove the strut to knuckle bolts at the bottom of the strut. On some vehicles, the brake caliper and rotor
    may need to be removed to gain access.
    Step 10: Remove the upper mounting plate bolts located in the engine or trunk compartment. Do not remove the
    center retaining nut! It is not safe to unload the spring from the assembly in this position.
    Step 11: Carefully remove the old strut assembly from the vehicle. Be very cautious not to let the strut "drop" down
    on your brake line, rotor or drum.
    Step 12: Install the new Complete Strut Assembly in the reverse order as above (steps 11-6). Using an anti-seize
    compound on all fasteners is suggested.
    Step 13: Carefully double check your work and make sure everything is tightened to manufacturers torque specifications.
    Step 14: Replace the tire the rotor and tighten to manufacturers torque specifications.
    Step 15: Slowly lower the vehicle down after removing the jack stands. Pay very close attention to any odd sounds
    when the vehicle is lowered onto the new Complete Strut Assemblies. 
    Step 16: It is very important that you immediately "road test" your vehicle right away to ensure that installation was done properly.
    Listen and feel for common signs of incorrect installation while driving slowly over speed bumps, rough road or potholes.

     



    1.We only accept PayPal.
     
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    3.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
    1.All the orders are shipped from USA warehouse.
     
    2.Orders processed within 24 hours of payment verification.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    1.30 days return offered for BRAND NEW items only, it starts from the day you received it.
     
    2.All returned items should be in the original packaging and you need to provide us with the shipping tracking number, specific reason for the return, and your eBay ID.
     
    3.We will charge 20% restocking fee of paid price if the return is due to buyer's misitake.

    If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

      We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.


    All rights reserved.