Product Details
Features
1.ESP32-DevKitC development board, the new version of the mainstream TYPE-C interface, the backplane can be equipped with ESP32 modules: ESP-WROOM-32,ESP-WROOM-32D,ESP-WROOM-32U, ESP32-WROVER.
2.ESP32-DevKitC is an entry-level ESP32 development board with integrated ESP32 pins pinned out for easy connection and use. It can be used to evaluate the full range of ESP32 modules and chips, and can be easily plugged into a breadboard.
3.ESP32-DevKitC is a small development board based on ESP32 modules, supporting Wi-Fi and Bluetooth functions. The board has a rich set of peripherals, so users can easily realize product development.
4.The on-board LDOs are led out to supply power for external components.ESP32-DevKitC groups different peripheral interfaces to help users get started with product development easily.
5. The ESP32-DevKitC has excellent RF performance, allowing users to design and develop applications without having to consider RF and antenna design. The basic system requirements are already included on the development board, so users only need to connect the USB cable for development.
2.ESP32-DevKitC is an entry-level ESP32 development board with integrated ESP32 pins pinned out for easy connection and use. It can be used to evaluate the full range of ESP32 modules and chips, and can be easily plugged into a breadboard.
3.ESP32-DevKitC is a small development board based on ESP32 modules, supporting Wi-Fi and Bluetooth functions. The board has a rich set of peripherals, so users can easily realize product development.
4.The on-board LDOs are led out to supply power for external components.ESP32-DevKitC groups different peripheral interfaces to help users get started with product development easily.
5. The ESP32-DevKitC has excellent RF performance, allowing users to design and develop applications without having to consider RF and antenna design. The basic system requirements are already included on the development board, so users only need to connect the USB cable for development.
Specification
ESP32-DevKitC development board:
ESP32 based module
EN: Reset button.
Boot: Download button. Press and hold the Boot key, and press the EN key at the same time (do not release the Boot key at this time) to enter the "Firmware Download" mode and download the firmware through the serial port.
USB-to-UART Bridge: Single chip USB-UART bridge that provides up to 3 Mbps transfer rate.
Interface: TYPE-C connector that can be used as a power supply for the board or as a communication interface between the PC and the ESP32-WROOM-32 module.
Communication: 2.4 GHz Wi-Fi + Bluetooth
Processor: high-performance Xtensa@32-bit LX6 dual-core processor with ultra-low power co-processor.
Multiple peripherals: Optimal power performance, RF performance, stability, versatility and reliability for various application scenarios and power requirements.
The board can be powered by one of the following three power supply options:
TYPE-C connector power supply (default)
5V/GND pin supply
3V3/GND pin supply
Dimension: 54.4*27.9mm
ESP32-DevKitC development board:
ESP32 based module
EN: Reset button.
Boot: Download button. Press and hold the Boot key, and press the EN key at the same time (do not release the Boot key at this time) to enter the "Firmware Download" mode and download the firmware through the serial port.
USB-to-UART Bridge: Single chip USB-UART bridge that provides up to 3 Mbps transfer rate.
Interface: TYPE-C connector that can be used as a power supply for the board or as a communication interface between the PC and the ESP32-WROOM-32 module.
Communication: 2.4 GHz Wi-Fi + Bluetooth
Processor: high-performance Xtensa@32-bit LX6 dual-core processor with ultra-low power co-processor.
Multiple peripherals: Optimal power performance, RF performance, stability, versatility and reliability for various application scenarios and power requirements.
The board can be powered by one of the following three power supply options:
TYPE-C connector power supply (default)
5V/GND pin supply
3V3/GND pin supply
Dimension: 54.4*27.9mm
Module Performance:
ESP-WROOM-32D
Chip: ESP32-D0WD
SPI: Flash 32 Mbit, 3.3 V
Crystal: 40 MHz
Antenna: On-board PCB antenna
Wi-Fi protocol: 802.11 b/g/n (802.11n at speeds up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs guard interval support
Operating channel center frequency range: 2412~2484 MHz
Bluetooth protocol: BT v4.2 BR/EDR and BT LE compliant
RF: NZIF receiver with -97 dBm sensitivity; Class-1, Class-2 and Class-3 transmitters; AFH
Integrated crystal: 40 MHz crystal
Integrated SPI flash1: 4 MB
Operating/Power Voltage: 3.0 V ~ 3.6 V
Average operating current: 80 mA
Supply current minimum: 500 mA
Recommended operating temperature range: -40 °C ~ +85 °C
ESP-WROOM-32D
Chip: ESP32-D0WD
SPI: Flash 32 Mbit, 3.3 V
Crystal: 40 MHz
Antenna: On-board PCB antenna
Wi-Fi protocol: 802.11 b/g/n (802.11n at speeds up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs guard interval support
Operating channel center frequency range: 2412~2484 MHz
Bluetooth protocol: BT v4.2 BR/EDR and BT LE compliant
RF: NZIF receiver with -97 dBm sensitivity; Class-1, Class-2 and Class-3 transmitters; AFH
Integrated crystal: 40 MHz crystal
Integrated SPI flash1: 4 MB
Operating/Power Voltage: 3.0 V ~ 3.6 V
Average operating current: 80 mA
Supply current minimum: 500 mA
Recommended operating temperature range: -40 °C ~ +85 °C
ESP-WROOM-32U
Chip: ESP32-D0WD
SPI: Flash 32 Mbit, 3.3 V
Crystal: 40 MHz
Antenna: External antenna connector, need to be used with external antenna
Wi-Fi protocol: 802.11 b/g/n (802.11n, speed up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs guard interval support
Operating channel center frequency range: 2412~2484 MHz
Bluetooth protocol: BT v4.2 BR/EDR and BT LE compliant
RF: NZIF receiver with -97 dBm sensitivity; Class-1, Class-2 and Class-3 transmitters; AFH
Integrated crystal: 40 MHz crystal
Integrated SPI flash1: 4 MB
Operating/Power Voltage: 3.0 V ~ 3.6 V
Average operating current: 80 mA
Supply current minimum: 500 mA
Recommended operating temperature range: -40 °C ~ +85 °C
Chip: ESP32-D0WD
SPI: Flash 32 Mbit, 3.3 V
Crystal: 40 MHz
Antenna: External antenna connector, need to be used with external antenna
Wi-Fi protocol: 802.11 b/g/n (802.11n, speed up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs guard interval support
Operating channel center frequency range: 2412~2484 MHz
Bluetooth protocol: BT v4.2 BR/EDR and BT LE compliant
RF: NZIF receiver with -97 dBm sensitivity; Class-1, Class-2 and Class-3 transmitters; AFH
Integrated crystal: 40 MHz crystal
Integrated SPI flash1: 4 MB
Operating/Power Voltage: 3.0 V ~ 3.6 V
Average operating current: 80 mA
Supply current minimum: 500 mA
Recommended operating temperature range: -40 °C ~ +85 °C
ESP32-WROVER
Supply Voltage: 2.3V ~ 3.6V
Frequency: 2.4 GHz ~ 2.5 GHz
Mounting Type : SMT
Data Rate: 150Mbps
Protocol: 802.11b/g/n
Storage Capacity: 4MB
Wi-Fi Protocol: 802.11 b/g/n (802.11n with speed up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs protection interval support
Operating channel center frequency range: 2412 ~ 2484 MHz
Bluetooth protocol: Compliant with Bluetooth V4.2 BR/EDR and Low Power Bluetooth standards
RF: NZIF receiver with -97 dBm sensitivity
Class-1, Class-2 and Class-3 transmitters; AFH
Module interfaces: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, Pulse Counter, GPIO, Capacitive Touch Sensor, ADC, DAC, TWAI® (ISO 11898-1 protocol compliant, i.e. CAN specification 2.0)
On-chip sensors: Hall sensors
Integrated crystal: 40 MHz crystal
Integrated SPI flash: 4 MB
Integrated PSRAM: 8 MB
Operating voltage/supply voltage: 2.3 V ~ 3.6 V
Operating Current: Average: 80 mA
Minimum supply current: 500 mA
Recommended operating temperature -40 °C ~ 85 °C
Supply Voltage: 2.3V ~ 3.6V
Frequency: 2.4 GHz ~ 2.5 GHz
Mounting Type : SMT
Data Rate: 150Mbps
Protocol: 802.11b/g/n
Storage Capacity: 4MB
Wi-Fi Protocol: 802.11 b/g/n (802.11n with speed up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs protection interval support
Operating channel center frequency range: 2412 ~ 2484 MHz
Bluetooth protocol: Compliant with Bluetooth V4.2 BR/EDR and Low Power Bluetooth standards
RF: NZIF receiver with -97 dBm sensitivity
Class-1, Class-2 and Class-3 transmitters; AFH
Module interfaces: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, Pulse Counter, GPIO, Capacitive Touch Sensor, ADC, DAC, TWAI® (ISO 11898-1 protocol compliant, i.e. CAN specification 2.0)
On-chip sensors: Hall sensors
Integrated crystal: 40 MHz crystal
Integrated SPI flash: 4 MB
Integrated PSRAM: 8 MB
Operating voltage/supply voltage: 2.3 V ~ 3.6 V
Operating Current: Average: 80 mA
Minimum supply current: 500 mA
Recommended operating temperature -40 °C ~ 85 °C
List
1 x Development Board
1 x Development Board
- EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.