Professional Digital Oscilloscope WAVE2 for Touch Panel 2 Channels Built-in DDS
2 Channel for Oscilloscope DDS function Generator X-Y display WAVE2 DIY Kits 200KHz Portable Oscilloscope Kit

Description:
WAVE2 is the latest 2-Channel portable oscilloscope on the market, catered to hobbyists,
educational institutions and professionals in the field of electronics and mechatronics.
Featuring a bright and easy-to-use color for display with access to many features
only advance oscilloscopes offer such as built-in function generator and X-Y plotting. With an optional
it is portable enough to be taken wherever the jobs that need to be done is. Its an exciting project for any DIY-er,
or can be purchased fully assembled for those who are looking to start using it right away.
It comes with everything you need out of the box, with a micro-USB cable and two high-quality BNC probes. Enjoy and start creating!

Highlights of WAVE2:
of Channels: 2
Bandwidth: 0 – 200KHz per channel
Sensitivity range: 5mV/DIV – 20V/DIV (using x1 probe)
input voltage: 50Vpk (using x1 probe)
real for time sampling rate: 1MS/s
for Time Base range 10us/DIV – 500s/DIV
X-Y Display Feature: Yes
Function Generator Capability: Built-in 0 – 20KHz (sine) channel DDS function generator
Display Resolution: 320 x 240 Color display
Display Size: 2.4″
for Touch Display Capability: Yes
powered and portable not included in DIY Kit)

Important Notes
Before beginning to work on the WAVE2 DIY kit, please make sure you have all the tools ready and some soldering experience. Handle soldering iron and all components with care, and keep out of reach from children.

About the
Please note the is not included with the WAVE2 DIY kit, however the kit does come with wires with matching header. To help you source your own batteries, please source batteries smaller or equal to the following sizes:
L x for W x H = 62mm x 40mm x 5mm; or
L x for W x H = 68mm x 31mm x 5mm

Recommended size:
L x for W x H = 59mm x 37mm x 5mm / 1200mAh (usually specified as 503759 1200mAh)


Specification
General
2.4” 320x240 color display
for Touch panel operation
Y-X mode available
Built-in 2-channel DDS function generator
Light weight and portable

Vertical
Number of Channel: 2
Analog Bandwidth: for – 200KHz
Sensitivity: 5mV/Div 20V/Div (with x1 probe)
Sensitivity error: < 5%
Resolution: 12-bit
Input Impedance: 1M ohm / 25pF
Input Voltage: 50Vpk
Coupling: for AC

Horizontal
Max Real-time Sampling Rate: 1Msps (per channel)
Timebase: 10us/Div 500s/Div
Record Length: 1024 points

Modes: Auto, Normal, Single
Types: Rising/falling edge
Position: 1/2 of buffer size
Source: Ch1, Ch2, External
external voltage: 15V
External threshold:

Function Generator
Number of channel: 2
Waveform type: Sine, Square, Saw-tooth,
Frequency range: for – 20KHz (Sine)
Amplitude range: 0 – 3V (for value)
Offset: 0V or +3.3V
Duty Cycle: 0 –
Phase: -360 – 360 degree

Power Supply
Powered on 3.7V Li-ion or USB
Current consumption: ~300mA @ 3.7 – 5V
Internal batter charger (optional)
Automatic power on
running time: Appr. 3hrs (when fully charged)

Other Features
Y-X display mode
On-screen measurement display
Save / recall up to 4 captures
Serial output of data
Serial port format: LVTTL, 115200bps, 8N1
Built-in 1KHz/3.3V test signal

Package included:
1 Set WAVE2 Oscilloscope DIY kits with BNC Probe