This is a full Cisco UCS Blade Bundle, all the hardware required in setup a Cisco UCS Platform.

INCLUDED

4 x Cisco UCS-B200-M3 blade servers each with 2 x Intel XEON E5-2660v2 Eight Core CPU's, 256GB ram and 1240VIC 
2 x Cisco UCS-FI-6248UP Fabric Interconnect switch
1 x UCS-5108 Chassis with 4 x power supplies
2 x 2208XP Fabric extenders

The UCS 5108 chassis is a 6RU chassis the that can accommodate up to 8 half-width blades or 4 full-width blades, or any combination that will fit in the chassis. The chassis has two I/O bays for Fabric Extenders such as the UCS 2208XP.

Specifications

• Height: 10.5 in. (26.7 cm); 6 rack unit (6RU)
• Width: 17.5 in. (44.5 cm); fits standard 19-inch square-hole rack (or round hole threaded or non-threaded, with optional adapter kit)
• Depth: 32 in. (81.2 cm)
• Weight: 90 lbs (40.83 kg) empty, 255 lbs (115.66 kg) fully configured
• Blade server slots: 8 half-width slots, 4 full-width slots, or combination of half- and full-width slots.
• IO slots (for FIs or FEXs): 2
• Fabric Extenders: Compatible with 2208XP, 2204XP, and 2104XP Fabric Extenders
• Fabric Interconnects: Compatible with 6324 Fabric Interconnects
• Power: Four Power Supplies supporting N, N+1 and N+N Grid redundancy.
• Fans: 8 hot-swappable fans, Each fan module contains 2 redundant fans; up to two fans can fail in the system.
• Management: Managed from the Cisco UCS 6100/6200 Series or 6324 fabric interconnects by Cisco UCS Manager (redundant management operations when the chassis is configured with two fabric extenders or two 6324 fabric interconnects)
• Backplane: 1.2 TB of aggregate throughput; supports 10BASE-KR connections for 8 blades
• Regulatory compliance: Products comply with CE Markings per directives 2004/108/EC and 2006/108/EC
• AC input voltage: Voltage Range 100-120 VAC, 200-240 VAC nominal (range: 90-132 VAC, 180-264 VAC)
• AC input frequency: 50 to 60 Hz nominal (range: 47 to 63 Hz)
• AC Input current: < 15 Amps @ 100 VAC
• Maximum Input VA: 2790 VA @ 200 VAC
• Maximum output power per power supply: 2500 W at 200 to 240 VAC (up to four power supplies)

The Cisco UCS 2208XP Fabric Extender (Figure 3) has eight 10 Gigabit Ethernet, FCoE-capable, Enhanced Small Form-Factor Pluggable (SFP+) ports that connect the blade chassis to the fabric interconnect. Each Cisco UCS 2208XP has thirty-two 10 Gigabit Ethernet ports connected through the midplane to each half-width slot in the chassis. Typically configured in pairs for redundancy, two fabric extenders provide up to 160 Gbps of I/O to the chassis.

Specifications

• Hardware forwarding at 640 Gbps
• Low-latency cut-through design, providing predictable, consistent traffic latency regardless of packet size, traffic pattern, or enabled features
• Layer 2 VLAN trunks
• IEEE 802.1Q VLAN encapsulation
• Support for up to 1024 VLANs and virtual SANs (VSANs)
• Support for Cisco Data Center VM-FEX architecture
• Jumbo frames on all ports (up to 9216 bytes)
• Pause frames (IEEE 802.3x)
• Layer 2 IEEE 802.1p (class of service [CoS])
• CoS-based egress queuing
• Egress strict-priority queuing
• Egress port-based scheduling: Weighted Round-Robin (WRR)
• Eight hardware queues per port

The Cisco UCS VIC 1240 enables a policy-based, stateless, agile server infrastructure that can present up to 256 PCIe standards-compliant interfaces to the host that can be dynamically configured as either network interface cards (NICs) or host bus adapters (HBAs). In addition, the Cisco UCS VIC 1240 supports Cisco Data Center Virtual Machine Fabric Extender (VM-FEX) technology, which extends the Cisco UCS fabric interconnect ports to virtual machines, simplifying server virtualization deployment.

Specifications

• Ports Qty: 4 ports
• Data Link Protocol: 10 GigE, 10Gb FCoE
• Throughput: 40 Gbps
• Compliant Standards: IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ae, IEEE 802.1Qbb, IEEE 802.1Qaz
• Features: VLAN support, priority-based flow control, Jumbo Frames support
• Min Operating Temperature: 50 °F
• Max Operating Temperature: 95 °F
• Dimensions (WxDxH): 3.7 in 7.2 in