Generator Set Controller DC62D for Diesel/Gas Genset Parameters Monitoring
This series of controllers is specially designed for starting, stopping, parameter monitoring and fault monitoring of diesel, gasoline and gas generator sets and has the function of parameter setting.
The controller adopts a 4.3-inch TFT color large-screen LCD to display the relevant parameters of the generator set, a new and original UI design, and the parameters are displayed by analog pointers and numbers. The LCD screen can display a variety of current fault states at the same time, and can effectively implement protection and stop when the generator set is not working normally.
The controller built-in simplified Chinese, English and other display interfaces can be selected, and any language interface can be customized according to customer requirements. All parameters of the controller can be adjusted through the buttons on the controller panel, or adjusted and monitored through the USB port or RS485 interface using a PC, which can be widely used in various types of generator set automation systems.
Main Features:
Parameters Display:
Engine RPM
Engine oil pressure
Engine water temperature
Engine fuel temperature
Engine cylinder temperature
Engine Tank temperature
Engine fuel level
Engine battery voltage
Charging voltage
Mains Frequency (only for DC62D)
Mains phase voltage L-N(only for DC62D)
Mains phase voltage L-L(only for DC62D)
Generator 3 Phase voltage L-N
Generator 3 Phase voltage L-L
Generator 3 phase current A
Generator Frequency Hz
Generator Power Factor COSφ
Generator active power KW
Generator apparent power KVA
Generator reactive power KVar
Current loading rate %
Total average loading rate %
Current consumption KWH
Total consumption Kwh
Total Crank times
Current running time
Total running time
Protection:
Over speed
Under speed
Low oil pressure
High water temperature
High Oil temperature
High Cylinder Temperature
High Tank temperature
Low fuel level
Low oil level
External emergency alarm
D+ Opened
RPM Lost
Sensor Open
Over Frequency
Under Frequency
Over voltage
under voltage
over current
Non-balance of current
Over power
Lack of Phase
reverse phase sequence
Gen load failure
Gen unload failure
Mains Load failure
Mains unload failure
Primary maintenance expire
Secondary maintenance expire
Maintenance expire
Low water level alarm
Emergency Stop
Crank failure
Over battery voltage
Under Battery voltage
Charging failure
Battery Charging failure
Stop Failure
Parameters:
Options |
Parameters |
Working voltage |
DC8V----36V Continuous |
Power consumption |
Standby:24V:MAX 1W |
Working:24V:MAX 5W |
|
AC Voltage Input |
1P2W 30VAC-276VAC(ph-N) |
2P3W 30VAC-276VAC(ph-N) |
|
3P4W 30VAC-276VAC(ph-N) |
|
Rotate speed sensor Frequency |
200-10000Hz |
MAX Accumulating Time |
99999.9Hours(Min Store time:6min) |
Fuel Relay Output |
16Amp DC+VE Supply voltage |
Start Relay Output |
16Amp DC+VE Supply voltage |
Programmable Relay output 1 |
5Amp DC+VE Supply voltage |
Programmable Relay output 2 |
5AMP Non-contact-Normal open--Normal close output |
Programmable Relay output 3 |
5AMP Non-contact Normal Open output |
Programmable Relay output 4 |
5AMP Non-contact normal open output |
Excitation output |
Max 1AMP DC+VE supply voltage |
Switch value input |
Available if connecting with Battery - |
Working condition |
-20-65℃ |
Storage condition |
-40-85℃ |
Protection Level |
IP54:when waterproof rubber gasket is added between controller and its panel |
Overall dimension |
210mm*160mm*50mm |
Panel cutout |
186mm*142mm |
Weight |
0.85Kg |
Package include:
1 x DC62D Genset Controller