Product Description


Safe liquid pump with high output volume and quiet operation for both industrial and domestic use.

Food grade stainless steel features high temperature resistance, non-toxic, and rustproof;

FERRODAY Magnetic Drive Pump - Booster Pump

Safe Priority: Use this magnetic pump to transfer piping hot and heavy loads of liquid instead of moving giant brew kettles yourself, a good investment to avoid unpleasant accidents and injuries.

Save Time and Effort: Move hot and cold liquids at Max Flow of 19 LPM (5 GPM). Very efficient and all you have to do is simply powering the pump on.

  • Perfect for transferring liquid during brewing like wort circulation, wort cooling circulation;
  • Perfect for transferring wort to any kinds of vessels like fermenters, pots, kettles, tanks;
  • No matter hot or cold!

FEATURES:

High Temp Resistance:

  • Up to 120℃(248 ℉), perfect for wort circulation; Hot water circulating pump.
  • The extraction medium temp changes should be controlled within 100℃.

No Leak & No Block:

  • Closed static seal, no shaft needed magnetic design, no worry of leakage.
  • Semi-open impeller: Stronger but also easy to clean. Got smooth liquid flow with no block.

Safe Long power Cord:

  • It is safer to get the plug connection a few feet away from the pumping vessels, less likely to be exposed to water.
  • 4.75ft (1.4m).

Lifetime-Using:

  • Stainless steel head and stainless steel housing pump for strong resistance to abrasion and corrosion.
  • Fine finished stainless steel pump designed for strength and longevity.

Stainless Steel Head Magnetic Pump 15RM-110 - the safest and most efficient way to move heavy loads of liquid!

  • Max Capacity: 16/19 L/min---Rated Capacity: 8/12 L/min
  • Max Head :2.7/3.4 Meter---Rated Head:1.5 Meter
  • Max Temperature: 120 ℃ (248 ℉)
  • Outlet/ Inlet: 1/2" inch NPT
  • American Standard: 100/110V

Package:

Gross Weight: 6.23 lb

Content: Magnetic Drive Pump X 1


PLEASE DO NOT RUN DRY
  • This is NOT a self-priming pump, the head must be connected with water hose and let the water into the pump before turning on the pump.
  • If power cut suddenly, please close the outlet gate valve.

Please Note:

Please attach the pump at least 12” lower than your vessel.

Not for high viscosity fluids like beeswax, honey or cream;

Please clean it immediately after use- it will be very hard to clean up if you allow the wort to dry in the pump.

  • 1. Circulate clean water by 1-2 minutes;
  • 2. Switch to cleaner for 1-2 minutes;
  • 3. Circulate clean water again;
  • 4. Circulate your sanitizer;
  • 5. Dry in the air before storing

DO NOT RUN THE PUMP DRY ---- Please prime the pump before turning it on.

  • Priming Procedure:
  1. Position the pump at least 8-12" lower than the vessel you are pumping from.
  2. Open the valve on the vessel and allow liquid to flow from the vessel into the pump head.
  3. Open the valve on the outlet and then turn the pump on.
  4. Check for flow on the outlet hose immediately after you turn on the pump. If no flow, turn off the pump and repeat the priming procedure.
FOR HOMEBREW ✓ ✓ ✓ ✓ ✓