- Applicable Function: Thickening-stainless steel elbow 2.5 inches 90° mandrel elbow thickness 1.5mm / 0.06 inches pipe wall-201 stainless steel elbow, suitable for automobile modified exhaust elbows, staircase handrails, etc.
- Specification Parameters: stainless steel exhaust elbow pipe - 90 degree 2.5 inches / 63mm. Thickness: 1.5 mm. Back arc length: 150mm/ 5.9 inches (can be welded to 2.5 inches outside diameter piping)
- Stainless Steel Mandrel Bend Elbow: Made of 201 stainless steel, durable: not easy to damage and rust: stainless steel. Anti-oxidation, 90 degree elbow exhaust pipe.
- Material Advantages: no pollution, health, environmental protection, non-toxic, non-polluting, clean and polished surface.
- Precautions: Pay attention to the combustion hole when welding the stainless steel elbow. The wall thickness of the pipe is 1.5mm / 0.06 inch. If the combustion hole is accidentally welded, the pipe wall will be thickened and the welding will be perfect.
Product Description
Stainless Steel Elbow 2.5 Inch 90° Mandrel Elbow
- Applicable function: Thickening - stainless steel elbow 3 inches 90° mandrel elbow thickness 1.5mm/0.06 inches pipe wall - 201 stainless steel elbow, suitable for automobile modification exhaust elbow, stair handrail, etc.
- Applicable Features: Made of 201 stainless steel; Durable: Not easy to damage and rust: Stainless steel. Antioxidant, 90 degree elbow exhaust pipe.
- Notes: When welding stainless steel elbows, pay attention to the combustion holes. The wall thickness of the pipe is 1.5 mm/0.06 in. If the burn hole is welded inadvertently, the wall will be thickened and the welding will be perfect.
Application of stainless steel elbow to automobile intake and exhaust pipe modification
- The wall thickness of the 90° elbow made of stainless steel 201 is 1.5MM/0.059"
- Works perfectly with our straight pipes, each elbow is extruded individually, both ends are laser cut and then ultrasonically cleaned
- 100% brand new, never used, suitable for car intake and exhaust modification
- Note: Be careful when soldering, be careful of hole burning
Production process of stainless steel elbow 3 inch 90° mandrel elbow
- Diameter:2.5 inches / 76 mm (can be welded to pipes with 2.5 inches outside diameter)
- Material: 201 stainless steel
- Wall thickness: 1.5mm /0.059"
- Elbow diameter: 2.5 inches
- Back arc length: 5.9 inches