Visbella® High Temperature RTV Silicone is designed for Automobile production of bonding and sealing. This product is a one component RTV Silicone sealant, curing completely without odor release. Acid & Neutral solidified into elastic rubber strip after full cure. It’s used for in engine, high-temp pipe system, gearbox, carburetor etc.
Advantage 1:
•
100% Silicone without impurities and bubbles, Good Adhesion, High
strength, Pleasant Smell, Non-corrosive to Metal material, Short Skin
time (8~12 mins).
• Resistance to weathering, moisture, vibration, UV light.
• Heat stabilized at temperature from -54°C to 343 °C. • It is also highly resistant to oil,transmission fluid and antifreeze.
Advantage 2:
High Quality Mounting Card, not easy to get creased.
Advantage 3:
High frequency Film Heating Blister Sealing, not easy to shedding from card.
1. Surfaces must be clean, dry, and free of oil and grease.
2. Pierce seal at the end of the metal tube using the top of the cap.
3. Screw on applicator nozzle and cut to desired bead size.
4. Apply an even bead of silicone around perimeter of surface.
5. Assemble parts once silicone has skinned. Skinning should take about 8-12 minutes.
6. Remove any excess silicone.
7. The silicone will dry in 1 hour and cure completely in 18-24 hours.