- 2 x Thermistor Cable headers
- 1 x Front VGA headers
- 1 x COM port headers
- 1 x Power LED & Speaker headers
- 1 x Intelligent Platform Management Bus headers
- 1 x PSU SMBus headers
- 1 x BMC SMBus header
- 1 x Auxiliary Panel header
- 2 x Programmable LED headers*
- 1 x CPU fan connector ((4-pin))**
- 1 x CPU / water pump fan connector ((4-pin)) ( Smart Fan Speed Control)
- 3 x Chassis / Water Pump Fan Connector ((4-pin)) (Smart Fan Speed Control)
- 1 x 24-pin ATX power connector (High Density Power Connector)
- 1 x 3-pin ATX power connector
- 2 x 8 pin ATX 12V power connectors (for motherboards)
- 2 x 6-pin PCIe 12V power connectors (for motherboards
). - 2 x 6 pin Graphics 12V power connectors (for PCIe cards)
- 1 x Vertical Front Panel Audio Jack
- 2 x USB 2.0 pin connectors (supports 4 USB 2.0 ports)
- 1 x USB 3.2 Gen1 header (supports 2 USB 3.2 Gen1 connector)
- 1 x front Type-C connector USB 3.2 Gen2x2 header (20 Gb/s)
- 2 x SGPIO headers
- 1 x CPU HP-SMBus connector
- 1 x Non Maskable Interrupt Button header
- 1 x Dr. Debug
with LEDs- 1 x LED Power Button
- 1 x LED Reset Button
- 1 x CMOS Data Clear Button*Supports up to 5V / 3A, 15W LED strip
**CPU_FAN1 supports fan power up to 1A (12W).
CPU_FAN2/WP supports fan power up to 2A (24W).
CHA_FAN1~3/WP supports fan power up to 2A (24W).
*****Plug the Multi PSU Adaptor Cable that comes with the package to ATX_CON1 if you use a secondary PSU.
It is required to connect both ATX12V1 and ATX12V2; otherwise, the system may not boot up properly.
It is required to connect all 8 pin and 6 pin 12V power connectors when overclocking.
It is required to connect 6 pin PCIE 12V power cord to either GFX_12V1 or GFX_12V2; otherwise, the system may not boot up properly.