Product Description

XLR to USB Adapter Cable, Mugteeve Microphone Female XLR Cord to Computer PC USB Interface Adapter 10Feet for Computer Mic Recording

This XLR female to USB cable adapter is designed to send microphone signal into computer for recording and editting. You can use it to recording microphones, mixers, DJ consoles and any other devices with xlr output. This XLR female to USB adapter is also very popular on liveStream, broadcast, music recording, video communicating, etc. Compatible PC system includes Windows /VISTA /MacOS 09 or higher versions.

Nylon braided, heavy duty

This XLR female to usb cable is nylon braided, it's ultra strong and heavy duty.

OFC shielded, noise free

The inner conductor is full covered with spiral OFC(oxygen free copper). Under the OFC layer there is also aluminum foil layer. With this two layer, the cable can avoid noise efficiently.

10feet long, suitable for guitar operation

10feet long can make you move a bit away from the desk. It's more convenient for liveStream, broadcast, music recording, video communicating, etc.

HS100B audio chip, no signal delay

HS100B is a professional ADC audio chip. It can work for both 16bit 48/44.1KHz signal. Suitable PC OS include windows /VISTA /macOS 09 or higher versions.

With Led indicator, easy to check working condition

The led indicator will flash when audio signal goes through. It's very convenient to know if the cable is on working or not.

Suitable PC System

Compatible PC system includes Windows /VISTA /MacOS 09 or higher versions.

Specification

Product Name Microphone XLR female to computer USB cable plug
Length 10feet / 3 meters
XLR Connector 3pin xlr female, nickel plated
USB Connector USB2.0 type-A port, with Led indicator, gold plated
Conductor 22 AWG OFC (oxygen free copper)
Shield Spiral OFC, aluminum foil
Audio Chipset HS100B, ADC Embedded, isolate noise, transimit faster
Coating braided nylon + PVC
Color Gray

Technical Parameter

Resoulution 16bit 48/44.1KHz
THD + N -78 dB
Signal to Noise Ratio 78 dB
Frequency Response 100hz - 20khz
Signal Boost Gain +10 dB
Suitable PC OS Windows /VISTA /MacOS 09 or higher versions

Easy installation: Just insert the USB plug to computer, computer will install drivers automatically. Within seconds, the cable is cable to work.

Step 1 - Insert plug to computer

Insert USB plug to computer, computer will install drivers automatically. Right-clik speaker at the bottom right of your computer, clik "Sounds".

Step 2 - Choose Speaker

Click Recording menu in pop-up window, choose USB microphone as input device. After USB microphone choosed, go into Properties by click the button at bottom right.

Step 3 - Setup Properties

In properties pop-up window, go to listen menu and select listen to this device. Click "OK" to close all the windows, the cable is ready to work.

Step 4 - Setup Input Level

If the input sound is too low, go to the "levels" memu in properties pop-up window, you can increase the input level there.

Applications: This microphone to computer cable is suitbale for audio devices with XLR output jack, including microphone, mixer, DJ console, etc.

Important Notifications

  1. For micropone connection, an extra phantom power is MUST for condenser mic, dynamic mic can work directly and properly.
  2. Remember to setup the input level in the Properties menu, in case the input sound is too low.
  3. If you want to put microphone signal signal into tablet or mobile phone, an OTG adapter is necessary.
  4. If you get signal latency on laptop, you may try on desktop, sometimes the soundcard would influence the transmission effect.
  5. If the cable can't work on your USB3.0 port, you can try to use USB2.0 port.
  6. This microphone to usb cable is NOT SUITABLE for any voice games like PS2 /PS3 /WII /XBOX, etc.