eBay

32"w X 10"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 34 5/8" Width X 12 5/8" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Install, Just Open and Close Latches
High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
UNRESTRICTED AIRFLOW For Your HVAC System - Noise Free Components - No Vibrating Louvers Etc.
QUALITY PACKAGING - Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality
INSTALLATION LOCATION - Ceiling recommended

Product Description

How To Measure a Grille

Measure the size of the air duct/drywall opening.
DO NOT MEASURE the overall size of the register itself
Only MEASURE the "HOLE" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
The first number in a grille size, represents the width, the second number represents the height.
Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.

Fixed Hinged Steel Return Filter Grille - Ceiling Recommended

Easy to Open and Close

Requires No Screwdriver To Open After Installation, Just Open and Close Latches to replace filter.

Fixed Hinged

This model has fixed hinges so that you cannot completely remove the door for safety. Perfect for ceilings.

This fixed hinged steel return filter grille model has ½” fin design.

Total outer size of this grille is; listed width + 2.5", listed height + 1.75".

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of your air system. These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.

High Standard Every part is hand inspected for quality before it is packaged, no exceptions.

No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.

Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.