This device boots to BIOS.
This device was tested with 2x Intel Xeon E5-2620V4 @2.10GHz processors and 256GB DDR4 RAM.
Excellent condition.
This bundle includes:
1x Supermicro X10DRD-iT Motherboard
2x Intel Xeon E5-2620V4 @2.10GHz processors
2x Supermicro SNK-P0047PS Heatsinks
1x I/O port shield
SPECS:
Form Factor | |
Dimensions | - 13.05" x 10.5" (33.15cm x 26.67cm)
|
CPU | - Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4.
- Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 145W, 1 QPI up to 9.6GT/s
|
Cores / Cache | - Up to 22 cores † / Up to 55MB† cache
|
Note | - † BIOS version 2.0 or above is required
|
Note | - ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
|
Memory Capacity | - Up to 256GB Registered ECC RDIMM, DDR4-2400MHz; Up to 1TB 3DS ECC/non-ECC LRDIMM, in 8 DIMM slots
|
Memory Type | - 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes | - RDIMM: 4GB, 8GB, 16GB, 32GB
- LRDIMM: 32GB, 64GB
- 3DS LRDIMM: 128GB
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
|
Chipset | |
SATA | - Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10
|
AHCI SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
|
SCU SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Dual LAN with Intel® X540 10GBase-T Ethernet Controller
Single LAN with Virtual Machine Device Queues reduce I/O overhead Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
|
Graphics | |
SATA | |
LAN | - 2 RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB | - 7 USB 2.0 ports (4 rear + 2 headers + 1 Type A)
|
Video Output | |
Serial Port / Header | - 2 COM Ports (1 rear, 1 header)
|
TPM | |