Colour: Black
Model: D1 cover lock
Brand: D1
Dimensions: 12.8CM long and 6.8CM wide. This product is a pair.
Installation: Need to punch holes to secure your hood.
Material: hard plastic + aluminum alloy
Features:
The lid lock of the general car is a little bit design, not very firm, and it will open when touched. Therefore, it is necessary to replace the pull-type racing car cover lock, and fasten the hood like a bolt, and then the violent impact will not open. For professional rally cars, the head cover lock must be retrofitted.
Description:
A front cover lock for the car that can ensure safety and meet the convenience and flexibility of the switch. It is characterized by a rotatable lock hook on the right side of the lock body. The lock hook has an upper hook and the lower part is The guide sleeve is provided with a compression spring and a positioning pin, and the switch pin is closed with a switch plug and a lever. The lever is connected with the switch link and the pull wire and the pickpocket. The pick-up is assembled in the cab, and the lock body is locked. The left side is designed with the locking pawl. When the front cover of the car is pressed down, the lock hooks the lock to rotate 45° and firmly locks the lock. The positioning pin is forced into the positioning hole by the compression spring, and the locking pawl is locked. The hook is hooked, and the lower part of the pawl inside the lock is also controlled by the switch link, forming a long closed state, achieving the purpose of safety and reliability. When it is to be opened, the picking hand is moved and the switch link is moved. Pulling the lever and pulling out the positioning pin, the lock spring is forcibly pushed out of the lock body by the tension spring, which satisfies the convenient and flexible conditions for opening.
