Enhance your car audio experience with the Alpine MRV-M500 Mono Power Digital Amplifier. With its MOSFET power supply, discreet pre-amp stage, and power MOSFET final outputs, this class-D amplifier delivers 500W RMS x 1 (14.4V at 1% THD+N) per channel into 2 ohms or 300W RMS x 1 (14.4V at 1% THD+N) per channel into 4 ohms. Its bass EQ function and continuously adjustable gain control allow you to fine-tune your sound, while the variable low pass filter crossover (50-400Hz, -24dB/oct.) ensures a smooth transition between frequencies.

Featuring a non-fading pre-amp output (4 volts), 4-channel speaker level inputs, and dimensions of 7-7/8" L x 7-7/8" W x 2-3/16" H, this Alpine amplifier is perfect for any car audio enthusiast. Its sleek design and high efficiency make it a great addition to any vehicle.

Features:

• 500W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)
• 300W RMS x 1 (4Ω, 14.4V, ≤1% THD+N)
• Same power in a 40% smaller chassis
• Evolution to Class D digital platform
• New snap-on terminal covers for easy installation
• Amplifier Type: Class-D (Digital)
• Channel Design: 1 Channel (Mono)
• Power Supply Design: DC-DC PWM Power Supply
• Power Supply: MOSFET
• Pre-Amp Stage: Discrete
• Final Outputs: Power MOSFET
• Crossover: Variable Lowpass Filter
• Gain Control: Continuously Adjustable Gain Control
• Bass EQ: Bass EQ Function
• Bass Control: Remote Bass Control (RUX-KNOB) Optional, Not Included
• Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
• Low-impedance Possibility:
• Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
• Board Circuitry: S.T.A.R. Circuit
• RCA Output: Non-Fading Pre-Amp Output (4 Volts)
• Speaker-Level Inputs: 4-channel Speaker Level Inputs
• Power Indicator: Top Mounted Blue LED Power Indicator
• Thermal Control: Multi-stage Power Limits
• Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.
• EQ (Equalizer): 0 to +12dB, fc=50Hz
• Power Requirements: 14.4 V.DC (11-16V allowable)
• Input Sensitivity (RCA Input): 0.15 - 4.0 V
• Input Sensitivity (Speaker Level Input): 0.4 - 10 V
• Input Impedance: >10k ohms
• Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz
• THD+N (10W into 4 Ohms): Ɔ.02 %
• THD+N (10W into 2 Ohms): Ɔ.03 %
• THD+N (Rated Power into 4 Ohms): Ɔ.2 %
• THD+N (Rated Power into 2 Ohms): Ɔ.3 %
• Damping Factor (10W into 4 Ohms at 100Hz): >750
• Signal to Noise (1W into 4 Ohms): >85 dB
• Signal to Noise (Rated Power into 4 Ohms): >105 dB
• Preamp Output: 4.0V Max.
• Remote Level: -20 to 0 dB
• Weight: 1.8 kg

Install

• Terminal Layout: Two-Sided
• Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

Dimensions

• Foot Print (WxHxD) mm: 200 x 55 x 200 mm
• Foot Print (WxHxD) in: 7-7/8'' x 2-3/16'' x 7-7/8''
• Heat Sink (WxHxD) mm: 165 x 55 x 200 mm
• Heat Sink (WxHxD) in: 6-1/2'' x 2-3/16'' x 7-7/8''
• Weight 5LB

Attention International customers: You are responsible for any and all customs, import duties, brokerage fees, and taxes. These charges are not included in the item price or stated shipping charges.

If your address is a PO BOX, FPO, MP or APO there will be additional surcharge for shipping. Also if you are in AK, HI, PR, Guam, Saipan or U.S. Virgin Islands, there will be a shipping charge.