RANCO. P/N: 012-4834. DUAL PRESSURE CONTROL., SPST SWITCH., CONVERTIBLE RESET SELECTOR SCREW FOR MANUAL RESET OR AUTOMATIC RESET., HIGH PRESSURE RANGE: 150 PSIG TO 450 PSIG., LOW PRESSURE RANGE: 10" VACUUM TO 100 PSIG., DIFFERENTIAL: 10 PSI TO 40 PSI., CONNECTIONS: TWO 48" LONG COPPER CAPILLARY TUBES WITH 1/4" BRASS FEMALE FLARE NUTS., NEMA 1 ENCLOSURE., REPLACES: 012-1551 RANCO & PENN P70MA-1 & P70LB-1., HAS A RESET BUTTON, RANGE ADJUSTMENT SCREW, CONVERTIBLE SELECTOR SCREW, DIFFERENTIAL ADJUSTMENT SCREW ON TOP OF CONTROL., HAS A MANUAL TEST OPERATION TAB., VOLTAGE: 24 VAC, 120VAC, 240VAC., SCREW TERMINALS., 7/8" OD HOLE FOR 1/2" CONDUIT CONNECTION., OVERALL DIMMENSIONS: 5 3/8" LONG X 3 1/2" HIGH X 2" WIDE., STEEL BODY AND PLASTIC COVER., WHITE/SILVER/BLUE/GOLD COLORED., ORIGINAL GENUINE RANCO OEM REPLACEMENT PART., GUARANTEED TO WORK PERFECTLY., BRAND NEW CONDITION., NEVER USED., INCLUDES: ONE DUAL PRESSURE CONTROL, MOUNTING BRACKET, HARDWARE, INSTALLATION INSTRUCTIONS, PACKAGING AND BOX., I CAN SUPPLY MORE PICTURES IF REQUESTED.
O12-4834
O Series Pressure Controls
The Ranco® Dual Pressure Controls combine the functions of a single high-pressure limit control and a single low-pressure control in one unit with a single pole, single throw (SPST) switch.
Features and Benefits
Dual-pressure controls connect to a refrigeration system's high- and low-pressure lines and make or break an electrical connection when pressures exceed or drop below the set point. They feature a control unit that helps protect the sensitive components and allows the user to view and adjust the setpoint. Both the high- and low-pressure sides are monitored and controlled independently. This allows the system to react to various conditions and operate efficiently and safely.
Brand: RANCO
Manufacturer Part Number: O12-4834
Series: O Series
Product Type: Dual Pressure Control
Minimum Pressure Range - Low Side: 10 in Hg
Maximum Pressure Range - Low Side: 100 psi
Maximum Differential Pressure - Low Side: 40 psi
Minimum Pressure Range - High Side: 150 psi
Maximum Pressure Range - High Side: 450 psi
Maximum Differential Pressure - High Side: 70 psi
Rated Voltage: 240V AC; 24V AC
Capillary Tube Length: 48 in
Low Side Reset Type: Automatic Reset
High Side Reset Type: Convertible
Compatible Refrigerant: R12; R134A; R22; R502
Contact Form: SPST
Contact Rating (AC): 24 A @ 120/240V
Mounting Orientation: Any Position
NEMA Rating: 1
IP Rating: IP44
Bellows Material: Copper
Pressure Connection Gender: Female
Pressure Connection Size: 1/4 in
Pressure Connection Type: Flare
Pressure Type: Differential
Includes: Non-Conductive Cover, Pressure Control, Mounting Bracket, Hardware, Instructions, Box
Standards: CE Certified; cULus Listed; cURus Listed
Process Connection: 1/4 in Female Flare
UNSPSC: 41112411
Country of Origin: Mexico (subject to change)
Description:
These controls offer a tailored variety of ranges and options for R12, R22, and R502 refrigerants. Low and high pressure functions are combined into a single control with one switch
Features:
Specs:
Cut-In PSI: 10" to 100 PSI
Cut-Out PSI: 150 to 450 PSI
Switch Action: SPST
Reset Type: Manual
Low Pressure Differential: 10 to 40 PSI
High Pressure Differential: 70 Fixed
Capillary Length: 48"
Product Type: Dual Pressure
Pressure Range: 150 to 450 psi / 10" to 100 psi
Min Pressure (PSI): 150
Max Pressure (PSI): 450
Connection Type: 1/4" SAE flare nut
Ranco dual pressure controls are used for either operating or protecting commercial refrigeration and air conditioning systems. Within one NEMA 1 enclosure, they are a combination of both high and low pressure controls interconnected to operate a common switch.
Ranco dual pressure controls are suitable for R12, R22 and R502 refrigerants and are available with either male flare or capillary with flare nut pressure connections.
The O12 series, with a single pole, single throw switch (SPST), will directly control a single phase compressor; the O12 may also be used with a contactor for pilot control for single and three-phase compressors. The O22, with a double pole, single throw switch (DPST), will directly control single of three-phase compressors. The electrical ratings inside the control cover must not be exceeded.
The low pressure closes (cuts-in) the switch on rise of compressor suction pressure and opens (cuts-out) the switch on pressure drop. The high pressure function overrides to open the switch as the compressor discharge pressure rises.