Simply Pick The Length / Thickness from the options list
EASY TO INSTALL JUST WRAP YOUR OLD BAFFLE IN THIS SHEET AND THEN FIX IT BACK INTO YOUR SILENCER.
Thin - Approximately 5mm Thickness
Thick - Approximately 10mm Thickness
Please NOTE - this can be compressed down quite a bit - thickness measured in its "fluffy" uncompressed state - Our 10mm might be your 8mm!!! etc
Wire is supplied to secure it - Approximately 10 wraps of about 3" Diameter -
Wire is 0.5mm Diameter (Approx)
All this baffle material is cut from a larger sheet - Normally you will get 160mm width
Interesting:
A two-stroke’s baffles perform one specific purpose; they reduce the level of exhaust noise. This is achieved by slowing down the gas flow via pressings, drillings, flutes etc along the baffle’s surfaces and in doing so partially combusted oil is deposited. This collects in ever increasing amounts which in turn increases the baffle’s surface area which further damps down exhaust noise and inexorably traps more carbon; so the cycle perpetuates and the exhaust gradually chokes. A lot of exhaust decoking issues are attributable to blocked baffles and this is always the first area to look at.
If you do order TWO sets - THEN you will receive a piece cut from the sheet approximately 30cm wide
You can then trim this down to the size you want using a pair of household scissors! We use a pair of old dressmaking scissors!
Hi Guys / Gals - If you do choose the "Next Day Delivery Service" - Please as a common courtesy - Send Us A Message - Thanks!