15T Hydraulic Cylinder Sleeve Liner Puller Tool For Truck Tractor or Automotive
 
Instructions:not included,please contact seller if you need help   

 

 

Description

This Cylinder Liner Puller Is Made of #45 Steel Which Has Good Corrosion and Wear Resistance, so It Is More Durable and Can Be Used for a Long Time.  Compared with the Traditional One, This Cylinder Liner Puller Is Ergonomically Designed with a Press Rod, Which Is More Labor-saving and Facilitates Your Use During Operation.

 

Key Features

High Durability: This Cylinder Liner Puller Is Made of #45 Steel Which Has Good Corrosion and Wear Resistance, so It Is More Durable and Can Be Used for a Long Time.

 

Ergonomically Designed: Compared with the Traditional One, This Cylinder Liner Puller Is Ergonomically Designed with a Press Rod, Which Is More Labor-saving and Facilitates Your Use During Operation.

 

High Efficiency: It Has a Maximum Pulling Force of 15t, Even the Ultra-thin Wall Can Also Be Easily Pulled out.

 

High Compatability:  This Cylinder Liner Puller Is Suitable for Any Model with the Inner Diameter of the Cylinder Liner Between 80-135mm. Meanwhile, Both Dry and Wet Types Can Be Used.

 

Wide Application: This Cylinder Liner Puller Is Used for the Disassembly of the Internal Combustion Engine and Cylinder Liner. It Is Suitable for Any Model with the Inner Diameter of the Cylinder Liner Between 80-140mm.

  

Details

#45 Steel Material: This Cylinder Liner Puller Is Made of #45 Steel Which Has Good Corrosion and Wear Resistance, so It Is More Durable and Can Be Used for a Long Time.

 

Adjustable Cylinder Diameter: There Is a Screw at the Bottom of the Cylinder Liner Puller Used to Adjust the Cylinder Diameter, so You Can Adjust It According to Your Own Needs.

 

Application

It Is Used for the Disassembly of the Internal Combustion Engine and Cylinder Liner. It Is Suitable for Any Model with the Inner Diameter of the Cylinder Liner Between 80-135mm.

 

How to Use

1. According to the Model You Need to Disassemble, Choose the Pull Plate and Connecting Rod (the Connecting Rod Is Divided into Two Lengths).
2. Connect the Connecting Rod with the Cylinder Lifter, the Steering Knuckle and the Pull Plate.
3. Twist the Steering Knuckle of the Cylinder Puller to a Right Angle with the Connecting Rod. the Straight Side of the Pull Plate Is Parallel to the Connecting Rod and Passes Through the Cylinder Liner so That the Small Diameter of the Pull Plate Is Locked into the Inner Diameter of the Cylinder Liner.

4. Sleeve the Two Support Tubes Onto the Diagonal Cylinder Head Screws.

5. Pass the Beam of the Cylinder Puller into the Slideway of the Lifting Gear, and Put Both Ends of the Beam into the Groove of the Support Tube.

6. Screw the Hydraulic Assembly into the Lifting Gear (Pay Attention to the Center Hole on the Beam) and Tighten It.
7. Check Whether the Pull Plate, Beam and Support Tube Are Accurately Positioned.
8. Transport the Small Plug of the Hydraulic Assembly with a Pressure Rod, and the Cylinder Sleeve Can Be Pulled out Smoothly.

 

Specification

Max. Pulling Force: 15t

Material: #45 Steel

Maximum Stroke (Piston Push Rod): 5cm/1.97in

Weight: 18kg/39.68lbs

 

Package Included

1* Cylinder Puller

Other Accessories for Use

 

Notes

  • The Extension of the Cylinder Push Rod Must Not Exceed 50mm.
  • Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.

    

 
 
 
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
 
2-9 working days to: USA
 
    •  
    • We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
  •  
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
PushAuction

DataCaciques