• Item ​Description:
  • * The inflatable lifting bracket is a type of pressurized shock absorber, which is often used to support the hood, hatch, trunk, rear window glass, etc. The longer the use of these pneumatic hydraulic rods, the worse the power, and they need to be replaced in time. In order to better ensure safety, when applicable to automobiles, replace the gas springs in pairs. Gas springs are also called engine hoods, hatches, lift doors, tailgates, rear window shock absorbers, struts, dampers, hydraulic cylinders, and arms. Installed in a specific car and a specific location.
  • 　
  • Item Features:

    • For 2005-2007 Nissan Murano Qty 2 Rear Liftgate Tailgate Lift Supports Struts

    Item ​Description:

    * The inflatable lifting bracket is a type of pressurized shock absorber, which is often used to support the hood, hatch, trunk, rear window glass, etc. The longer the use of these pneumatic hydraulic rods, the worse the power, and they need to be replaced in time. In order to better ensure safety, when applicable to automobiles, replace the gas springs in pairs. Gas springs are also called engine hoods, hatches, lift doors, tailgates, rear window shock absorbers, struts, dampers, hydraulic cylinders, and arms. Installed in a specific car and a specific location.

    　

    Item Features:

    1. Special treatment makes the surface of the piston rod have strong corrosion resistance
    2. Minimal friction that produces the lowest tensile force.
    3. Long life cycle.
    4. Protection against vibration and light side forces.
    5. Reference Part Number:6122 
    6. Installation position:Liftgate Tailgate Hatch

    　

    Fitment Information:

    2005-2007 Nissan Murano Base Sport Utility 4-Door Liftgate

    2005-2007 Nissan Murano S Sport Utility 4-Door Liftgate

    2005-2007 Nissan Murano SE Sport Utility 4-Door Liftgate

    2005-2007 Nissan Murano SL Sport Utility 4-Door Liftgate

    　

    What are the symptoms of a bad Lift Support?

    * Symptoms of Bad or Failing Hood Lift Support Shocks:

    1. Hood slowly closes on its own--The seals can wear out and begin to leak slowly over time. Once enough pressure has leaked from cylinder it will no longer be able to properly hold the weight of the hood, which will cause it to slowly lower until it eventually closes.
    2. Hood suddenly closes on its own---A faulty lift support may have worn seals that may appear to be able to support the hood, only to suddenly give out, causing the hood to slam shut.
    3. Hood does not stay up at all--If all of the pressure leaks from the lift support it will not be able to support the weight of the hood at all, and the hood will close as soon as it is opened.

    Item Specifics
    Brand autobasicparts
    Manufacturer Part Number 10377752
    Manufacturer Warranty 1 year
    Kit or single piece kit
    OE Spec or Performance/Custom OE Spec
    Placement on Vehicle Rear
    lubricated or sealed sealed
    Installation location Liftgate,Tailgate,Hatch
    OE/OEM Part Number 6122 Gas Springs Shocks Strut
    Actual Extended Length 20.62 inch
    Superseded Part Number SG325024 SG325016 SG325024
    Actual Compressed Length 13.12 inch
    Color Black
    Type Struts
    Product Type Lift Support Shock Struts
    Custom Bundle Yes
    Material Steel
    Modified item No
    Fitment Type Direct Replacement
    Bundle Listing No
    Fitting Included None
    Items Included 2 x Lift Supports
    Finish Smooth

    Payment

    Paypal accepted.

    Shipping

    90% packages will be shipped with in 24 hours. 

    Some other package will be shipped out within 48 hours, such as ambiguous addresses, or orders placed on holidays.

    Pakcage will be shipped via fedEx, UPS or USPS.

    Returns

    30-Day Free Return.

    Contact Us

    If you have any question or problem, please feel free to contact us.

    Shop Category
     Store Home
     ABS Wheel Speed Sensor
     Head Gasket Set
     Radiator
     Lift Support
     Towing Mirrors
     Door Handle
     Coolant Tank
     Door Lock Actuator
     Wheel Hub Bearing
     Window Switch
     AC Compressor
     Timging Kit
     Variable Valve Timing Solenoid
     Heater Core
     AC Condenser
     Throttle Position Sensor
     Blower Motor Fan
     Water Pump
     Fuel Pump
     Window Regulator
     Cooling Fan
     Fan Clutch
     Thermostat Housing
     Blower Motor Resistor
     Leveling Lift Kit
     Air Blend Door Actuator
     CV Joint Axles
     Sun Visor
     Other
    Hot Item
    Picture

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For 2005-2007 Nissan Murano Qty 2 Rear Liftgate Tailgate Lift Supports Struts

    Item ​Description:

    * The inflatable lifting bracket is a type of pressurized shock absorber, which is often used to support the hood, hatch, trunk, rear window glass, etc. The longer the use of these pneumatic hydraulic rods, the worse the power, and they need to be replaced in time. In order to better ensure safety, when applicable to automobiles, replace the gas springs in pairs. Gas springs are also called engine hoods, hatches, lift doors, tailgates, rear window shock absorbers, struts, dampers, hydraulic cylinders, and arms. Installed in a specific car and a specific location.

    　

    Item Features:

    1. Special treatment makes the surface of the piston rod have strong corrosion resistance
    2. Minimal friction that produces the lowest tensile force.
    3. Long life cycle.
    4. Protection against vibration and light side forces.
    5. Reference Part Number:6122 
    6. Installation position:Liftgate Tailgate Hatch

    　

    Fitment Information:

    2005-2007 Nissan Murano Base Sport Utility 4-Door Liftgate

    2005-2007 Nissan Murano S Sport Utility 4-Door Liftgate

    2005-2007 Nissan Murano SE Sport Utility 4-Door Liftgate

    2005-2007 Nissan Murano SL Sport Utility 4-Door Liftgate

    　

    What are the symptoms of a bad Lift Support?

    * Symptoms of Bad or Failing Hood Lift Support Shocks:

    1. Hood slowly closes on its own--The seals can wear out and begin to leak slowly over time. Once enough pressure has leaked from cylinder it will no longer be able to properly hold the weight of the hood, which will cause it to slowly lower until it eventually closes.
    2. Hood suddenly closes on its own---A faulty lift support may have worn seals that may appear to be able to support the hood, only to suddenly give out, causing the hood to slam shut.
    3. Hood does not stay up at all--If all of the pressure leaks from the lift support it will not be able to support the weight of the hood at all, and the hood will close as soon as it is opened.
    Item Specifics
    Brand :autobasicparts
    Manufacturer Part Number :10377752
    Manufacturer Warranty :1 year
    Kit or single piece :kit
    OE Spec or Performance/Custom :OE Spec
    Placement on Vehicle :Rear
    lubricated or sealed :sealed
    Installation location :Liftgate,Tailgate,Hatch
    OE/OEM Part Number :6122 Gas Springs Shocks Strut
    Actual Extended Length :20.62 inch
    Superseded Part Number :SG325024 SG325016 SG325024
    Actual Compressed Length :13.12 inch
    Color :Black
    Type :Struts
    Product Type :Lift Support Shock Struts
    Custom Bundle :Yes
    Material :Steel
    Modified item :No
    Fitment Type :Direct Replacement
    Bundle Listing :No
    Fitting Included :None
    Items Included :2 x Lift Supports
    Finish :Smooth


    Paypal accepted.

    90% packages will be shipped with in 24 hours. 

    Some other package will be shipped out within 48 hours, such as ambiguous addresses, or orders placed on holidays.

    Pakcage will be shipped via fedEx, UPS or USPS.

    30-Day Free Return.

    If you have any question or problem, please feel free to contact us.


    All rights reserved.