All Car Supplies CA

WHY CHOOSE US

24 Ways Damper & Height Adjustment Coilover For Scion TC 2011-2016 Toyota Zelas

Description



Introduction
maXpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil and upgraded racing springs, adjustable camber plate(for some vehicles), and decent outlook, offers you more ability to tune your suspension on performance and gives your vehicle more impressive appearance.  Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality and long life.

 

 

Application

For Scion TC 2011-2016 AGT20 North America & Canada Market 
For Toyota Zelas 2011-2016 (Central America, China, Middle East, Africa, South America Market)

 

 

 

Specification
Damping adjustable: Available, 24 levels of rebound damping force
Camber adjustable: Available
Shock structure type: twin -tube
Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models
Spring Rate Front: 8kg/mm(448lbs/in)
Spring Rate Rear: 7kg/mm(392lbs/in)
Spring length Front: 180mm
Spring length Rear: 183mm
Coilover overall length front: 500-590mm
Coilover overall length rear: 550-650mm
Spring Preload advised: 7-10 mm
Color: Black body with blue spring

 

 

Product included

1 x Set of Coilover Spring Kit (2 Front + 2 Rear)
1 x Pair of wrenches for height adjustment

 

 

Dimension
Package Size: 63*51*21 cm
Weight:26200g

 

 

Features
1. Lowered height adjustment from 1" - 3" which allows a lower center of gravity and also adds a more aggressive stance 
2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
3. 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
4. CNC machined Aluminum  top mounts and lockers-- - excellent strength, and save weight
5. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
6. Upgraded spring --- more than 600,000 times continuously test to assure its high tensile strength.
7. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
8. With a better-damping setting, you will get better performance and comfort at the same time.
9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
10. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts
11. Test for the best---Every part was tested on our professional machine before being assembled and tested by our professional racers on the road.
12. Clean room assembled---maintain a higher level of accuracy and reliability.
13. Upgraded damper oil---make damping more stable and smooth in a wide temperature range.

 

 

Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.

 

 

 

Notice
* Professional installation & alignment suggested. 
* Please check our store for other auto parts you may be interested in.