CUBE BABY
Preface
CUBE BABY is a portable and multifunctional guitar effector.It has 3
editable presets,the users also can customize effectors chain and save.CUBE
BABY has built-in battery,it has9 Preamp selection slots,
Chorus,Phaser,Delay,Reverb,8IR CAB slots and a Tuner.Beside,it support mobile
phone recording jack,BT,and computer sound card. It integrates a variety of
function,it is easy-carry and it has excellent sound!It could be a good partner
of your guitar.
The Power Supply
l lt is equipped
with built-in battery for power supply,which can last for 6 hours after full
charge.
l lt can charge
with the 5V adapter or the power bank.
l When the battery
run low,you can use the DC 5V/2A adapter,you need 2 hours to fully charge the
battery.
Effectors Chain
Tuner → Preamp→Phaser/Chorus→ Delay→ Reverb →IR CAB
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
Rear Panel
①IN: 1/4"MONO audio input jack.
②Power switch.
③ USB jack: Use to charge the
battery/the CUBE BABY can be sound card of computer/you can edit 3 groups of
presets on computer/you can import the IR on computer.
④ Audio output jack: It support mobile phone
recording.
⑤ Earphone output.
⑥ OUT: 1/4"MONO audio output jack.
Front Panel
①TYPE: 9 Preamp selection slots.
②GAIN: Gain knob.
③ TONE: Tone Brightness knob.
④MOD: CHORUS/PHASER.
⑤ TIME: Adjust feedback speed of echo repeats of
delay.
⑥FB: Adjust the number of echo repeats of delay.
⑦ MIX: Adjust the radio of wet and dry of delay.
⑧REVERB: Adjust the radio of wet and dry of reverb.
⑨IR CAB: 8 IR CAB slots.
⑩VOLUME:Volume knob.
⑪BT indicator.
⑫Charging indicator.
⑬C footswitch.
④B footswitch.
⑮A footswitch.
⑥ 3 indicators.
Effectors Module
Attention: Please make sure that CUBE BABY is in LIVE mode, then you
can listening-test the 1-5 items of effectors below.
1.PREAMP
|
SLOT |
NAME |
TYPE |
l TYPE knob: Select the
types of Preamp, there are 9 different types,please look at the list. l GAIN knob: Adjust the
gain. l TONE knob: Adjust the brightness. |
1 |
Based on Power-Zone Clean |
clean |
2 |
Based on US Gold 100 Clean |
clean |
|
3 |
Based on Two Stone Coral OD |
overdrive |
|
4 |
Based on Doctor3 B |
overdrive |
|
5 |
Based on CaliJP A |
overdrive |
|
6 |
Based on Day Tripper OD |
distortion |
|
7 |
Based on Shittcow Dist |
distortion |
|
8 |
Based on Wo Stone Coral OD |
distortion |
|
9 |
Based on Mr Smith Dist |
distortion |
2.MOD
l MOD knob: the left half
circle is used for CHORUS,the right half circle is used for PHASER.When the
knob is at middle,the indicator turned off,it means the MOD has been turned
off.
3.DELAY
l TIME knob: Adjust feedback
speed of echo repeats of delay.
l FB knob: Adjust the
number of echo repeats of delay.
l MIX knob: Adjust the ratio
of wet and dry of delay.When the knob is set to the far left,the MIX indicator
turned off,it means the DELAY has been turned off,and these three indicators of
DELAY have been turned off at same time.
4.REVERB
l REVERB knob: Adjust the radio
of wet and dry of reverb.When the knob is set to the far left,the indicator
turning off,it means the REVERB has been turned off.
5.IR CAB
l IR CAB knob: Select the types
of IR CAB.A total of 9slots,the first slot means the IR has been turned off;the
2-9 slots are 8 types of IR CAB.
SLOT |
NAME |
CAB TYPES |
1 |
Based on The IR CAB has been turned off |
None |
2 |
Based on Line 6 Vetta |
1X12 |
3 |
Based on Marshall 1960AV |
4X12 |
4 |
Based on Marshall 1960A T75 La610 |
4X12 |
5 |
Based on VHT Deliverance |
2X12 |
6 |
Based on Soldano |
2X12 |
7 |
Based on Peavey 5150+ Mesa Oversized |
4X12 |
8 |
Based on JSX KT77+ Mesa Stiletto AKG C1000 |
4X12 |
9 |
Based on Diezel V30SM57(Soldano HR PowerAmp) |
4X12 |
l You can import
the IR files to CUBE BABY on computer.The previously IR will overwritten with
the current IR.
6. TUNER
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
In TUNER mode,these six knobs represent the six strings of the guitar.
When you turning the string,the corresponding knob indicator will light on.
In TUNER mode,when you turning the string,these three knobs show the
pitch:
l The indicator lighting up means the string is
pitching too low;
l The indicator
lighting up means the string is at the correct pitch;
l The indicator lighting up means the string is
pitching too high.
Press and hold the B+C footswitchs at the same time for 2 seconds to
enter TUNER mode.
7.BT
l This product
supports BT,you can press and hold the "A+B" footswitchs at the same
time for 2 seconds to turn on/offBT.When the indicator lighting up blue,it
means the BT has been connected, then your phone can play music to the CUBE
BABY.When the indicator flashing blue,it means that BT is turning on,but not in
connection.
8.Mobile Phone recording
l This product
supports phone recording function,you can use the recording cable to connect
the Phone and CUBE BABY,then you can use your Phone to get a high quality
recording.
LIVE/PRESET/EDIT Mode
l
CUBE BABY has three operation modes,LIVE mode is
real-time performance mode,EDIT mode is use for edit the three presets,PRESET
mode is the most common state for performance.The initial power-on default
enters PRESET mode, tap the combination nail "B+C" for LIVE mode,or
tap the combination nail "A+B" for EDIT mode.
l PRESET mode is
the most normal playing state,you can use LIVE or EDIT to edit and save three
presets,then Three presets can be used by free footswitchs conveniently in
PRESET mode.
l In LIVE
mode,visual operations can be performed,knob timbre effect is what you see is
what you get,it is suitable for you to customize a effectors chain.You can use
the knobs to improvise the timbre when you performing.
l In EDIT mode,you
can fine-tune and edit 3 groups of presets, better for contrast with other
preset tones.
A. Function
Introduction of PRESET mode.
PRESETS |
EFFECTORS CHAIN |
TYPE |
A Footswitch |
Wo Stone Coral OD+DELAY+REVERB+VHT Deliverance 2x12 |
Distortion |
B Footswitch |
Cali JP A+DELAY+REVERB+Soldano 2x12 V30 |
Overdrive |
C Footswitch |
US Gold 100 Clean+MOD: CHORUS+DELAY+ REVERB+Marshall 1960AT75 LA610 |
Clean |
l In PRESET
mode,the VOLUME knob is the final output volume value,you can listen and use
the three PRESETS in real time,but you cannot use knobs to edit timbre.The
A/B/C footswitchs represent 3 PRESETS,when the PRESET had been selected,the
corresponding footswitch-indicator lightting on.If all three indicators are
off,the device is in Bypass.
B.Function Introduction of LIVE mode.
l When enter LIVE
mode,the default final output volume value in this mode is 80%,the VOLUME knob
is use for adjust the level of current effectors chain.
l In LIVE mode,the
A/B/C footswitchs can use to open/close the corresponding effect module,the
corresponding footswitch-indicator light is flashing/went off.Users can
customize the effectors chain,then press and hold the A/B/C to save.
l In LIVE mode,the
knob lights have only 2 states:lighting on/went off.lf the knob light is off,it
means that the effect of this knob is not on;lf the knob light is on,it means
that the effect has been turned on, and the knob timbre effect is what you see is
what you get.
C.Function Introduction of EDIT mode.
l Switch to EDIT
mode when you tap A+B,the machine will retain the data in the corresponding
knobs before switching.
l In EDIT mode,the
machine always retain the output volume value before switching to EIDT.
l The knob lights
have only 3 states:lighting on/went off/flashing.lf the knob light is off,it
means that the effect of this knob is not on;lf the knob light is on,it means
that the effect has been turned on,and the knob timbre effect is what you see
is what you get;lf the knob light flashing,it means that the effect has been
turned on,but the knob timbre what you get is diffrent from what you see.
l After you turn
the knob,the flashing knob light will become lighting on,The previously data
will overwritten with the current knob value.When the knob light lighting
on,the knob timbre effect is what you see is what you get.
l In EDIT mode,the
machine always retain the output volume value before switching,the VOLUME knob
is use for adjust the level of current effectors chain.
l After editing the
effectors chain,then switch to PRESET mode,the VOLUME knob become the final
output volume value.Therefore,it is recommended that after exiting EDIT
mode,users immediately turn the volume knob to the position before entering
EDIT mode.So that you can restore the output volume value of the previous
performing.
l In EDIT
mode,theA/B/C footswitchs can use for opening/closing the corresponding effect
module,the corresponding footswitch- indicator light is flashing/went off.Users
can fine-tune and edit 3 groups of PRESETS,then press and hold the A/B/C to
save.
How To Customize A Effectors Chain
Let's try to customize a effectors chain similar to Preset“A”.
1.When CUBE-BABY is turned on,tap the "B+C" to enter the LIVE
mode.Then you need to turn off all the effectors,so that all the knob
indicators had been turned off (eccept theVOLUME knob).Next step,you can turn
the VOLUME knob to the value you like.
2.Tap the C footswitch to turn on the TONE+AMP mudle,turn the TYPE knob
to the 8th slot,so we had select the "Wo Stone Coral OD".Then,turn
the GAIN knob to the 4 o'clock position,and turn the TONE knob to the value you
like.
3. Tap the B footswitch to turn on the MOD+DELAY mudle.We don't need
the MOD,so let's turn the MOD knob to the 12 o'clock position. Then,let's turn
the MIX knob to 10 o'clock position to turn on the DELAY effector.Next
step,turn the FB knob to 11 o'clock position, turn the TIME knob to 3 o'clock
position.
4. Tap the A footswitch to turn on the IR CAB+REVERB mudle.Turn the
REVERB knob to 10 o'clock position,then turn the IR CAB knob to the 5th slot,so
we had select the "VHT Deliverance".
5. Then let's adjust the level of current effectors chain,turn the
VOLUME knob to the value you like.
6. At this time,we had customized a effectors chain,then let's press
and hold the A footswitch for 2 second to save it to PRESETA.
7. Let's tap the "B+C" to enter the PRESET mode.You can use
the new PRESET A now.
The Software Interface
1.IR EDITOR
①IR files searching button:you can use it to find the IR on your
computer.
②IR files display interface:here is the IR files you had selected,you
can click and listen it.
③ Microphone distance simulator:you can adjust the distance of
microphone to speaker.When the distance closer,the sound
louder;when the distance farther,the sound lower.SO,what you need to
attention is:When the distance is100%,you couldn't hear the voice.
④IR saving location:you can use it to select the 1-8 location of IR
slots of CUBE BABY.
⑤Save button:click this button to save.
⑥ The IR Factory reset option.
⑦ Click this button to Factory reset the parameters of 3 PRESETS.
2. PRESETS PARAMETERS EDITOR
①Select the Preset you need to edit.At this time,if the software and
CUBE BABY are in the same Preset,you can hear the real-time sound of editing.
② Adjust the level of current effectors chain.
③ Adjust the IR CAB.
④ Adjust the REVERB.
⑤ Adjust the ratio of wet and dry of DELAY.
⑥ Adjust the number of echo repeats of DELAY.
⑦ Adjust feedback speed of echo repeats of DELAY.
⑧ MOD effector editor:0-6 is use to edit the CHORUS,7-8 is use to turn
off MOD,9-15 is use to edit the PHASER.
⑨Adjust the brightness.
⑩Adjust the gian.
⑪Select the types of Preamp.
⑫ Save button:click this button to save the PRESET.
(The pictures cannot be displayed due to the restrictions of the
platform, and the paper version of the manual will be in the product packaging
box.)
Technical Parameters
Input:Standard 1/4" jack MONO/TS
Output:Standard 1/4" jack MONO/TS
Sample rate:48KHz/24bit
Battery capacity:780mah
Size:161(L)X57(W)X17.5(H)mm
Weight:260g
Attachment:Charging cable,Recording cable
Seller Policy
Postage & Delivery
All products will be checked carefully and packed in good condition
before shipping.
Products are located in the warehouse in China.
Products will be received within 7-13
business days, If you are in the USA or
North America.
If you are in the Europe, you
will receive it within 7-19 business days.
If you are in the Asia, you will
receive it within 7-12 business days.
If you are in the South America,
you will receive it within 13-50 business days.
If you are in the Other regions and
countries, you will receive it within 13-50
business days.
About order handling time, usually we ship in 1-5 business days after receiving the clearing
payment. We do offer Expedited shipping methods.
Note:
Due to shipping policies restrictions, our shop is unable to ship to
Alaska, Hawaii, Puerto Rico, US Protectorates and APO/FPO address.
Your satisfaction is our aim!
Payment Policy
We gladly accept payment methods eBay approved.
Both of us must comply with the rules and requirements of the eBay. We
want to make sure the transaction is legal and compliant.
If you have any requirements or requests, please contact via eBay
message.
Your satisfaction is our aim!
(After-Sales Service) Return and Exchange
If the product you receive has quality problems, please contact us in
time, we will refund you or replace the product after confirmation.
Product Assurance 30-day unconditional return policy:
①Please keep the product packaging intact and undamaged, the product in
good condition and not affecting secondary sales, and send photos and videos of
the product to the customer service for confirmation.
②For returns caused by non-product quality defects, the buyer shall bear
the shipping costs.
③For returns caused by product quality defects, the round-trip shipping
costs shall be borne by the buyer. Half-year warranty policy.
④The shipping
costs incurred for repaired products shall be borne by the buyer.
⑤If the product
problem is caused by the buyer, the buyer shall bear the cost of parts and
other related maintenance costs.
Feedback
If you have any problems, Please don't give us a negative comment
without reasonable communication, please contact us in time. We’ll deal with
your problems and demands as soon as possible, to help you save money, give you
the best service quality and attitude, you can also buy High-Quality products
from our store!
The most important of all, Your Satisfaction is our aim!