MS-6BS Band Selector for ICOM CAT interface
ANTENNA COAXSIAL
SWITCH
6 POSITIONS, 2 KW PEP, UHF or N connectors
The MS-6BS consists of two units, the water splash resistant switching box that mounts on your tower or mast and the control unit thats placed at your operating station. The connection between ICOM and the selector is made with a 3.5mm jack cable. The device decodes the selected band and switches your pre-selected antenna.
The MS-6BS provides ease in switching antennas without disconnecting a connector. This 6position antenna switch can be used for 46 to 75 ohm systems, plus handle 2000 watts SSB, 1500 watts CW. (Tested for extended periods with ACOM1500-power amplifier)
High power provide special relays with powerful changeover contacts (max current 2x16A) The breakdown voltage between contact 1 kV. When power off all antenna outputs are also grounded.
Cast aluminum housing ensures a high degree of shielding and protection from nterference.
Technical characteristics:
Maximum power:
2000 Watt CW / VSWR<1.5:1
Max. SWR load: 3:1
Attenuation: < 0.05 dB at 60 MHz
The voltage supply relay: 12-15 V
Current consumption: at less than 600 mA
Temperature range: -35 ... +60 deg C
• Flexible Mounting: The MS-6BS outside unit attached with 4 bolts.
• Reliable Connectors: Teflon UHF-style SO-239 females,silver plated contacts,
or N connectors. If you prefer N type please message me.
• Control Line: Uses
any 8 conductor UTP/FTP cable. Tested with length more than 100m.
• Easy-To-Read Antenna
Indicators - LCD-Color indicate the selected antenna. .