One (1) pair of Cerwin Vega AT15 crossovers.

Some of the material around several of the screw holes has broken away. I was able to save one piece and will include it with the crossovers.

Whoever soldered the fuse jumper wire at the binding post for one of the AT15s left too much solder on the spade lug for it to accept the push-on connector on the crossover. The connector was flattened and then clamped under the nut for the binding post.

Before I disassembled the AT15s, I ran an impedance sweep with a Dayton DATS V3 and no problems were found.