TASCAM linear PCM recorder DR-70D for digital single lens reflex camera F/S NEW
Description:
Equipped with four XLR/TRS combo jacks, built-in mixer with a wide range of
4 inputs and 2 outputs, 4ch multi-recording or stereo mix recording
high-quality "HDDA (High Definition Discrete Architecture) microphone preamplifier" equipped with
a compact yet robust design for a variety of slate-tone generators that facilitate positioning with video files
can be installed on both the top and bottom of the camera
Battery:: 2 AA Battery
Manufacturer Model: DR-70D
High-quality [HDDA microphone preamp] equipped with sD / SDHC card - stereo built-in microphone mounted . 48/96kHz (WAV/BWF) + +4dBu line level / Phantom power supply (24/48V) compatible XLR/TRS input (1/L, 2/R) - CAMERA IN, OUT terminal - Maximum output 50mW + 50mW headphone terminals: Battery replacement while attached to cameras and cloud platforms: HOLD switch to prevent erroneous operation , Mini-B type USB cable included, 4 AA batteries or USB bus power (sold separately, AC adapter PS-P515U) driven by a mixer built-in three-stage low-cut filter (40/80/120Hz) Limiter function , dual-wreck function , auto-wreck function , priwreck function , self-timer recording function , track increment function , jumpback playback function , equalizer mounted , level alignment function , resume function , divide function , slatetone generator , stereo mini jack microphone input terminal (1-2)
[DR-70D] is used when shooting video with DSLR (digital SLR camera) or video camera, etc. It is a four-track linear PCM recorder that can make the audio of the video more sound. equipped with four XLR microphone inputs
, it meets the needs of a wide range of video production sites, from entry users to professionals.
a robust yet compact housing that can be mounted on both the top and bottom of the camera, and by installing a stereo microphone, you can easily record even by itself. By combining the xlR microphone input with the built-in microphone
, for example, the built-in microphone allows for ambience, xlR input, and a gun microphone for interviewing, there by a variety of settings without compromising mobility.
The preamplifier, which amplifies the microphone input sound, is equipped with a proprietary HIGH Definition Architecture (HDDA) circuit with a gain width of up to 64 dB and an EIN (equivalent input noise) -120dBu.
The four microphone inputs are also equipped with a limiter and a low-cut filter, which allows for independent gain adjustment.
It is also equipped with a stereo mini jack input that supports general video camera microphones, and a total of 4CH recording is possible with a variety of microphone combinations.
The high-quality sound quality is also a major feature, and we have incorporated the know-how of the audio manufacturers that we have cultivated so far not only in circuit design but also in the selection of parts, such as adopting the Texas Instruments NE5532 for the op amps that affect sound quality.
also equipped with a number of specifications that specialize in video shooting with a camera.
It is equipped with a function to record the slatetone that is the basis for the alignment of the camera's audio and the sound recorded in the DR-70D, and a CAMERA OUT terminal for outputting the audio after being mixed in the DR-70D to the camera. In addition
, it is equipped with a CAMERA IN terminal for inputting and monitoring the output sound of the camera, enabling audio monitoring of DSRs without headphone terminals. "DR-70D" specializing in
video shooting is a high-quality 4-track recorder that can be used in combination with many cameras in a wide range of sites such as film, documentary production, and television recording.
equipped with two omnidirectional microphones.
It is possible to easily record a natural stereo sound image even if it is only the main body. In conjunction with a small gun microphone, it can be recorded in a compact setting, such as recording the speaker's voice and surrounding sound at the same time in the interview.
It
is equipped with a mixer that can mix a total of four channels of four XLR inputs (1-4), stereo mini inputs (1-2), and stereo built-in microphones (3-4) that support phantom power.
PAN and level can be adjusted, limiter, five-stage low-cut filter, and delay that can compensate for the distance between microphones. In addition, MS decoding function is also equipped, so mS stereo microphone scan is also possible.
equipped with four XLR/TRS inputs.
4-channel specification that enables operation such as ambience and speaker-by-speaker microphone, two gun microphones and stereo microphones.
With 3.5mm stereo input for the 1st and 2nd channels and a built-in microphone for the 3and 4 channels, a wider range of microphone settings are possible.
MONO/DUAL MONO: Ideal for recording only the voice of one performer.
STEREO/DUAL STEREO: Ideal for recording with an internal or stereo microphone.
2MIX/DUAL 2MIX: Creates a stereo file with multiple inputs mixed.
Each DUAL mode is a mode that simultaneously records different levels, allowing you to create a backup file to clipping due to over-input.
It is equipped with a dedicated terminal that outputs audio after mixing to the camera.
It is possible to record the same audio to the CAMERA with the DR-70D. Built-in generator that can pronounce the slate tone as a reference in the alignment.
can be pronounced automatically at the start, start, and end of recording, and you can use the SLATE button to pronounce slatetones at any location.
automatically: OFF/HEAD (starting recording only) / HEAD+TAIL (at the start of recording + at the end) If you want to manually enter: Press and hold the SLATE button to pronounce.
, the 1-2 input terminal of the 3.5mm stereo mini of the
input terminal has a maximum input level of +10 dBV, and it is a specification that the microphone for the video camera of the stereo mini output can be connected.
You can set the input terminal 1-2 by connecting a video camera microphone for ambience, and a shotgun microphone with XLR connection to 3-4.
plug-in power is also available.
In addition to the
camera OUT terminal, it is equipped with a CAMERA IN terminal that enables the camera's audio monitor. By using the monitor select function of the
"DR-70D", it is not only "DR-70D" but also the camera's voice can be monitored efficiently.