LUXMAN E-250 Compatible Phono equalizer amplifier Blaster With tracking 100V
Description
Condition : New
NF type equalizer (RIAA)
Input sensitivity (1kHz) MM 3.2mV, MC HIGH 0.37mV, MC LOW 0.12mV
Input impedance
MM 34kΩ, 47kΩ, 56kΩ, 100kΩ (switchable)
MC HIGH 40Ω, MC LOW 2.5Ω
Rated output / Output impedance 250mV / 300Ω
Gain (1kHz) MM 38dB, MC HIGH 57dB, MC LOW 66dB
Maximum allowable input (1kHz) MM 120mV, MC HIGH 15mV, MC LOW 5mV
RIAA Deviation
MM 20Hz to 20kHz (±0.3dB)
MC HIGH / MC LOW 20Hz to 20kHz (±0.5dB)
0.003% total harmonic distortion
S/N ratio (IHF-A) MM 90dB, MC HIGH 83dB, MC LOW 80dB
S/N ratio (IHF-A) MM 90dB, MC HIGH 83dB, MC LOW 80dB
Channel separation (10kHz) 91dB min.
Inputs: 2 unbalanced
Outputs: 1 unbalance
Power supply voltage AC100V (50 / 60Hz)
Power consumption 6W (as specified by the Electrical Appliance and Material Safety Law)
Depth includes front knob 6mm and rear terminal 11mm.
Weight 4.3 kg (main unit), 6.0 kg (standard packaging)
Accessories Power cable (JPA-10000i: with polarity mark)
[Attention Buyer]
With the exception of some devices such as USB power supplies, most Japanese electronic devices have a voltage of 100V and an "A" plug adapter.
In order for you to use this device outside Japan where the voltage is higher than 100V such as 200V-240V, you are required to use a transformer to adjust the voltage to your local country.
Without using a transformer and plug adaptor, this device may be broken. Please purchase these devices in your local store.