eBay

Compact PAC12 7MHz50MHz 100W 8Band HF Portable Rhortwave GP Antenna QRP

DESCRIPTION

Features:
*Brand new and high quality
*Made of high quality materials,
*Packaging weight: about 1.35kg Packing size: 36*22*4cm
*Shrunk length is about 34.5cm, standing length is about 410cm
*Frequency: Can work in 8 frequency bands (7mhz-50mhz) at 40.30.20 17.15.12.10.6 meters.
*Impedance: 50 (Ω)
*Rolling power: 100w
*Longitudinal wave: 40m swr frequency band <1.3, other frequency bands can be adjusted to 1.1

Slider reference data:
*Turn close to the aluminum tube 4 times 7mb, retract the lever about 10cm, and the foot wave is 1.1-1.3
*The position of the 14mb slider is close to the side of the telescopic antenna 6 times, and then pulled about 20cm. Foot wave 1.1-1.3
*21.4 aluminum tube 4-pole antenna, 7-10cm, vertical wave 1.1-1.3
*29.6 As long as the antenna is pulled out from the pole and everyone pulls it back about half a knot, the standing wave will be 1.2

Precautions:
*1 Put the ground grid connection ring directly on the ground anchor screw and screw it into the base. Then there is the link base - four aluminum tubes - loading coil - whip antenna.
*2. In the case of standing wave adjustment, if you have a genius analyzer, find the lowest point of the standing wave and see whether the resonant frequency is high or low. If the resonant frequency is high, the antenna is short. Extend the whip antenna or increase the number of turns in the loading coil. If the resonant frequency is lower, shorten the whip antenna or reduce the number of turns of the loading coil.
If you don't have a natural meter, you can use the standing wave meter that comes with the radio, set it to FM, AM or RTTY mode, reduce the transmit power to about 10 watts, press the transmit button, adjust the RF knob, and search for radio stations in each frequency band. The lowest point of the standing wave depends on the resonant frequency and is then adjusted using the above method
*3. When using floor net, tear off 3-4 pieces. The antenna impedance can be changed by adjusting the angle of the ground grid.

Package includes:
1 x Aluminum alloy base (anodized to black)
1 x multi-band load coil (40m - 10m; material: nylon. Note: the load coil is molded and not handmade)
1 x ground anchor 10 x 240 mm (uncoated for good grounding)
4 x black aluminum oxide tubes 19 x 320 mm (anodized)
1 x 2.5 m stainless steel whip antenna (can be for customized)
1 x 10 strands of ground wire (tear as needed when using; generally tear 3 strands)
1 x cloth bag

Notes:
1. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
2. Please allow a slight deviation between the data and the manual measurement.

POLICES

ShippingPaymentWARRANTY

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.

It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.