Bipolar 6mm & 4mm conductive rubber loops / TENS / estim / electrode / Black

Double Monopole Insulated 6mm Conductive Rubber Loops / TENS / estim / electrastim / et312 / 2B. Condition is New. Dispatched with Royal Mail 2nd Class Large Letter Free P&P.   Colour: Black Plug Size: 2mm   This is a 3D printed Double Insulated Monopole Conductive Rubber Electrode.    The insulator allows you to direct current through both the Dorsal and Perineal nerves when worn as the lower loop with all tackle through it in conjuction with a second electrode placed higher on the shaft. This stimulates both nerve groups for a better result.   Each Insulator will be printed in BLACK PLA. This electrode comes with one loop of 10"/25cm and a loop of 8"/20cm of British 6mm highly conductive rubber tubing that takes 2mm plugs.   It will be dispatched un-painted but with 6mm conductive rubber tubing already fitted.   Your TENS cables 2mm plug plugs in at either end, you can attach up to four plugs to this electrode from different channels if you are using a Tri-phase set-up to make it the base connector. You can either use this as both electrodes on a single channel or spice things up with two other electrodes to target other areas.   I recommend that you paint it to seal the surfaces with a plastic paint such as Krylon Fusion For Plastic.   Private listing.   I will not leave feedback unless you ask me to for your privacy.   Note: Images shown are renderings unless stated, the printed product will show some layer lines and require a light sanding.

Having spent a lot of time sourcing 6mm cord locks for my conductive rubber electrodes, I have always found it hard to find ones that are a good fit. The ones marketed as 6mm are actually tight and hard to assemble. This spurned me into action to design my own range of them.

But these have a twist; as they are designed specifically for e-stim, I have created them with a dual role. They work with both 6mm conductive rubber and 4mm conductive rubber. Yes, you can use 4mm rubber in regular cord locks, but the smaller diameter means the internal spring is not as strong.

These cord locks grip 6mm and 4mm conductive rubber equally tightly. The holes are 6.5mm and 4.5mm in diameter, making feeding the CR easy.

They are more expensive than the regular cord locks, but these are so much better. Printed on a special industrial 3D printer out of PA2200 nylon, a bio-compatible material that is perfect for the job.

In use, you may initially get some dust coming from them, but this is perfectly normal and a product of the manufacturing process.

So grab some and take your loops to the next level.

Note: Sold in packs of two.