• Compatibility:
  • 1990-1993 Volvo 240 2.3L
    1989 Volvo 244 2.3L
    1989 Volvo 245 2.3L
    1990-1992 Volvo 740 2.3L
    1990 Volvo 760 2.3L
    1990-1991 Volvo 780 2.3L
    1991-1995 Volvo 940 2.3L
  •  
  • Specification:
  • Condition: 100% Brand New Mass Airflow Sensor / Meter
  • Replacement: Directly Replacement
  • Material: Plastic
  • Number Of Pins: 5
  • Color: Black (As picture showed)
  • Warranty: 1 Year
  • Interchange Part number: TF-MAF025, 038906461B, 038 906 461 B, 038906461BX, 0986284009, 0 986 284 009, 0281002531, 0 281 002 531
  • One kind of the MFA sensor (for reference) : 
  •  
  • About the mass air flow (MAF) sensor:
  • For Volvo 240 244 245 740 760 780 940 2.3L L4 MAF Mass Air Flow Meter MAF Sensor

    Compatibility:

    1990-1993 Volvo 240 2.3L
    1989 Volvo 244 2.3L
    1989 Volvo 245 2.3L
    1990-1992 Volvo 740 2.3L
    1990 Volvo 760 2.3L
    1990-1991 Volvo 780 2.3L
    1991-1995 Volvo 940 2.3L

     

    Specification:

    Condition: 100% Brand New Mass Airflow Sensor / Meter

    Replacement: Directly Replacement

    Material: Plastic

    Number Of Pins: 5

    Color: Black (As picture showed)

    Warranty: 1 Year

    Interchange Part number: TF-MAF025, 038906461B, 038 906 461 B, 038906461BX, 0986284009, 0 986 284 009, 0281002531, 0 281 002 531

    One kind of the MFA sensor (for reference) : 

     

    About the mass air flow (MAF) sensor:

    * What does a MAF Sensor do?
    The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

    * Where are these sensors located?
    The Mass Air Flow sensor is located in the intake ducting after the air filter.

    * Installing the replacement MASS AIR FLOW SENSOR(MAF):
    1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    5. Carefully plug the harness connector lead into the MAF sensor.

     

    Packaging:

    1x Mass Air Flow Sensor/Meter


    Item Specifics
    Manufacturer Part Number C11506801APS
    Brand CLASSIC AutoParts
    Manufacturer Warranty 10 Year
    Type Mass Airflow Sensor (MAF Mass Air Flow Sensor/Meter)
    Placement on Vehicle Front
    Color Sliver
    Numbers of Pin 6pins
    Interchange Part Number M3203-A 280212016 5517020-A
    Reference Part Number 336-59094-A MF20044-A 0280212016-A
    Other Part Number 0986280101-A 8602792-A 3517020-A 8251497-A
    w/ housing Yes
    Replace Direct Replacement
    Package 1pcs of Brand New MAF Sensor

    Payment
    1.We only accept PayPal.
     
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    3.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
    Shipping
    1.All the orders are shipped from USA warehouse.
     
    2.Orders processed within 24 hours of payment verification.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns
    1.30 days return offered for BRAND NEW items only, it starts from the day you received it.
     
    2.All returned items should be in the original packaging and you need to provide us with the shipping tracking number, specific reason for the return, and your eBay ID.
     
    3.We will charge 20% restocking fee of paid price if the return is due to buyer's misitake.
    Contact Us

    If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

    Feedback

      We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Fast and Free
    Best seller
    For Volvo 240 244 245 740 760 780 940 2.3L L4 MAF Mass Air Flow Meter MAF Sensor

    Compatibility:

    1990-1993 Volvo 240 2.3L
    1989 Volvo 244 2.3L
    1989 Volvo 245 2.3L
    1990-1992 Volvo 740 2.3L
    1990 Volvo 760 2.3L
    1990-1991 Volvo 780 2.3L
    1991-1995 Volvo 940 2.3L

     

    Specification:

    Condition: 100% Brand New Mass Airflow Sensor / Meter

    Replacement: Directly Replacement

    Material: Plastic

    Number Of Pins: 5

    Color: Black (As picture showed)

    Warranty: 1 Year

    Interchange Part number: TF-MAF025, 038906461B, 038 906 461 B, 038906461BX, 0986284009, 0 986 284 009, 0281002531, 0 281 002 531

    One kind of the MFA sensor (for reference) : 

     

    About the mass air flow (MAF) sensor:

    * What does a MAF Sensor do?
    The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

    * Where are these sensors located?
    The Mass Air Flow sensor is located in the intake ducting after the air filter.

    * Installing the replacement MASS AIR FLOW SENSOR(MAF):
    1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    5. Carefully plug the harness connector lead into the MAF sensor.

     

    Packaging:

    1x Mass Air Flow Sensor/Meter



    1.We only accept PayPal.
     
    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    3.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
    1.All the orders are shipped from USA warehouse.
     
    2.Orders processed within 24 hours of payment verification.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    1.30 days return offered for BRAND NEW items only, it starts from the day you received it.
     
    2.All returned items should be in the original packaging and you need to provide us with the shipping tracking number, specific reason for the return, and your eBay ID.
     
    3.We will charge 20% restocking fee of paid price if the return is due to buyer's misitake.

    If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

      We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.


    All rights reserved.