Product Description
Introduction to PiKVM:
PiKVM is a remote management solution based on open source software and hardware technology. It can remotely connect to the computer through the Raspberry Pi, turn on/off or restart the computer. Configure UEF I/BIOS or even reinstall the operating system using a virtual CD-ROM or flash drive. You can use Remote Keyboard and Mouse to emulate a keyboard, mouse, and monitor and then display them in a web browser as if you were working directly on the remote system. This is true hardware-level access and does not rely on any remote port, protocol or service!
BliKVM Hat product introduction:
The BliKVM Hat version is a piece of hardware based on Raspberry Pi 4B and is used for KVMOverIP. Hat's key functions include HDMI video capture, ATX control, PoE power supply, OLED screen display, and RTC clock. Hat comes with a metal shell for protection and heat dissipation. Hat can be installed into a 1U rack. Supports both blikvm mirror and pikvm mirror.
Accessories introduction:
ATX module
The ATX module is connected to the computer's motherboard via a DuPont cable.
ATX modules come with full-height and half-height PCle bezels.
USB/PWR distribution board
The RPI4 port is used to connect to the Raspberry Pi 4B.
The USB port is used to connect to the controlled computer.
When using PoE power supply, there is no need to use a distribution board.
HDMI simulator
If the controlled computer cannot output the screen correctly, you can try to use this module to solve the problem. After connecting this module to the Hat, connect it to the controlled computer through an HDMI cable.
USB/PWR distribution board
The metal shell can protect the Hat and be used for heat dissipation. Each port on the shell has a clear silk screen to indicate the purpose of this port. This enclosure can be easily installed in a 1U rack.
Hardware details:
HDMI input
The bridge chip is Toshiba TC358743, which supports both video and audio (I2S). The maximum input resolution is 1080p@50fps. Fixed HDMI reverse power issue.
CN-ATX
The CN-ATX interface is connected to the ATX adapter board (accessory to HAT) through a network cable, which can turn on, off and restart the controlled computer.
show
White OLED display with 128x32 resolution and SSD1306 chip. This display can display the temperature, IP address and other information of the Raspberry Pi.
POE
Standard: IEEE 802.3af PoE Input voltage: 37-57VDC Output power: 5VDC/2.4 A
Plug in the PoE jumper cap and enable the PoE power supply
fan
The IPKVM HAT houses a small fan that is controlled by your Raspberry Pi via GPIO12.
Real Time Clock
The clock chip is a PCF8563 and is controlled by your Raspberry Pi via I2C. The coin-shaped battery is installed under the HDMIIN module.
Package Included:
1x Raspberry Pi IPKVM HAT
1x ATX adapter board
1x USB/PWR splitter
1x HDMI pass-through EDID emulator
1x metal case
1x 32G TF card
1x USB Type-C to USB Type-C cable
1x Dupont cable 8PIN male to male 40cm
1x Dupont cable 8PIN male to female 40cm
1x Phillips screwdriver
1x Phillips wrench socket
About Item
All items sold by us are being described to the best of our abilities, as accurate as possible, and with utmost conscientiousness on our part.
However, to avoid any potential oversights, I respectfully request your assistance in helping us to make this a mutually satisfactory transaction by THOROUGHLY reviewing item description and photos, and asking all questions PRIOR TO BIDDING.
Customer Satisfactory
1.We back our commitment with superb service, 100% full money back and a customer satisfaction guarantee.
2.I am here and ready to assist you with any questions or concerns you might have before or after the purchase.
3.My goal is to make sure you are a happy customer and pleasant shopping with us.
Feedback
If you are satisfied with the purchase and our total service, your comment is very important in our business success. Please take a minute to leave us a positive feedback with an overall Detailed Selling Rating (DSR) of 5.
Our eBay account setup auto feedback, so eBay system gives you automatically Positive feedback back after your positive feedback left.
If you plan to give us a neutral/negative feedback Or open ebay/payment case, please write to us immediately so that we can do our best to resolve your problem.
Shipping Time
Royal Mail 48: Estimated delivery is 2-5 working days after dispatch.
Royal Mail 24: Estimated delivery is 1-3 working days after dispatch.
The estimated arrival times are specified directly from information provided by our couriers. These are estimates only and not a guaranteed delivery date.
We stand behind everything that we sell and will do everything possible to assure you are satisfied.
When you receive your purchase if you are not 100% satisfied, please sent me ebay message and we will do our best to make you happy. If you still want to return your purchase, simply ship the item(s) back to us and we will refund your original purchase price and the original shipping charge.
Buyers are responsible for the postal cost of returning the items.
We must be notified of the intent to return your item within 30 days of receiving the item.
Items returned must be in the same condition that they were received.
How to return
1,Please ask us for return address .
2,Shipping back the package .
The RMA#(Return Merchant Authorization Number = Your ebay ID) must be clearly written on the return package ,Otherwise the package will be refused.
3,Sent us the return tracking number.
4,All returns will be inspected prior to a credit being issued.
If you have any questions, our Customer Service staffs welcome you to sent me ebay message.
Business Hours: Monday-Saturday 9:00-18:00