Skin Care Equipment Facial Steamer Professional UV Hot Ozone Beauty Salon Spa
Specification:
Model: 08A
Material: ABS, PC, PP
Voltage: 110V 50-60HZ
Power: 750W
Mounting Type: Free-standing
Color: White
Plug: America Standard
Product Benefits: Cleanse, Rejuvenate, Whiten and Smoothening
Spray Distance: About 30-40cm/11.81-15.74in
Use Distance: About 25cm/9.84in
Nozzle Rotatable Angle: 360°
Water Tank Capacity: 860ml/29.08ounce
Power Cord Length: About 1.8m/5.90ft
Use Time: About 30min
Fogging Time: 3-5min
Gross Weight: 3.5kg/7.71lbs
Net Weight: 3kg/6.61lbs
Package Size: 54*19*26.5cm/21.25*7.48*10.43in
Stand Height: 1.06m/3.5ft
Spray Tube Height: 1.26m/4.1ft
Product Width: 52cm/20.5inch
Stand Adjustable Range: 1-1.3cm/0.39-0.51in
Installation:
1. Take out all the accessories.
2. Tightly connect the steel tube to the bottom cassette.
3. Install the 360° universal wheel.
4. Install all the five universal wheels.
5. tighten the bottom screw.
6. Attach the upper steel pipe.
7. connected to the main body of the face steamer.
8. Attach the nozzle arm
9. Complete the installation.
How to Use:
1. Open the herbal cup and add the herbal pack to it.
2. Slowly add tap water (can not exceed the maximum water level line), and cover the lid.
3. Plug in the power and press the hot spray switch and ozone switch.
4. Adjust your position and wait for a while to fog up.
Package Included:
1*Facial Steamer Main Unit
1*Nozzle Arm
2*Support Frames
5*Support Feet
1*Connecting Bracket
1*English Manual
All Accessories Needed for Installation
Notes:
1.Turn on the hot spray first then the ozone light.
2.Put the medicine package in the medicine cup.
3.Please do not exceed the maximum water level when adding water. If the water level is too low probe will alarm prompt to add water.
4.It is recommended to use tap water for the first use. Please do not use distilled water when hot spraying. If you use pure water or mineral water when the machine alarm please add a pinch of salt to the water to increase the conductivity.
5.After adding water, please tighten the water tank to prevent the tank from leaking steam or falling off causing burns.
6.The distance between the nozzle and the facial skin should be adjusted according to the strength of the jet and the sensitivity of the user to the steam.
7.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
