800W High Power Motor 9-head Power Tools 9200-19000 RPM High Speed Motor Built-in Cooling Blades Ball Bearing High Speed Motor
Specifications:
High power high speed motor, motor diameter 60mm, similar to 9 series motor, motor appearance work is good with thick material, front and rear double ball bearings, built-in cooling blade, 12-pole motor rotor, power over 885/887 motor, carbon brush is high current high copper compensation type.
The motor was originally used in high-power power tools above, power type high-power motor, compared with similar motors generally maximum power of about 800W, peak power over 1000W.
The rated use voltage of the motor is estimated to be 18V, the actual test of the motor can work 12-24V, low voltage low speed low power, high voltage high speed high power, the specific use depends on their actual test, the high-power motor starts the instant current is very large, the instant dozens of A current is normal, 18V no-load is more than 80 watts, Therefore, it is necessary to drive a high-current power supply or a power-type high-current battery, or to start slowly with a DC motor PWM governor, which can reduce the instantaneous impact of large current on the power supply when the motor starts.
The motor is tested at voltages 12V and 18V and 24V speeds as follows:
12V voltage, no load current 4A, no load speed 9200 RPM.
18V voltage, no load current 4.5A, no load speed 14000 RPM.
24V voltage, no load current 5.3A, no load speed 19000 RPM.
The motor weighs 760 grams.
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 1mm-1cm differences due to manual measurement.
Package Included:
1x Motor
