1958-68 Chevy Impala Bel Air Front Rear Red Wilwood Disc Brake Kit Chrome Master

Item Description

1965-1968 Full size Chevy Front Wilwood Disc Brake Kit, Red Rear Disc Brake Conversion


This disc brake kit will fit the following Chevy Full size Cars:

1965-1968 Chevrolet B-Body's: Chevy Biscayne, Chevy Bel Air, Chevy Impala


Complete Power Disc Brake Conversion Kit:

  • 11" Cross Drilled & Slotted Rotors (5x4.75 pattern)
  • Dual Piston Wilwood RED Front Calipers 120-10937 -RD (MKD-52 Brake Pads)
  • 1-1/8" Bore Wilwood Brushed Chrome Oval Master
  • 8" Dual Chrome Power Brake Booster
  • Chrome Angled Booster Brackets
  • Pedal Rod Ext. & Clevis
  • Chrome 4 wheel disc brake proportioning valve kit
  • Caliper Brackets & Caliper Hoses Braided Steel
  • Rear disc brake kit for 10-12 Rear End
  • Rear drilled/slotted rotors (2.782 opening on register)
    Measure the rear axle you may have to turn down axles for rotor to fit.
  • Maximum Diameter 6.11" to fit rotor hat.
  • Rear Caliper Brackets
  • Rear Powder Coated Red Large 1" bore GM Rear Calipers w/ E-Brake (Not Wilwood)
  • E-Brake Cables
  • Stainless Steel Braided Brake Hoses, with Banjo Bolts & Copper Crush Washers!!! ($50 Value Often Not Included in Other Ebay Listings)
  • Bearings, Seals, Dust Caps, Spindle Nuts, Spindle Washers and all Hardware & Brackets!

ALL BRAND NEW PARTS! NOTHING REBUILT OR RE-MAN!!!

*** Note *** Please Indicate in the notes section at check out your year, make & model. Or Send us a message after you purchase.

We don't recommend this kit for Buick & Olds & Pontiac applications. As similar as these applications tend to be to Chevrolet, there are differences that won't allow this kit to be a direct bolt on for these particular cars and we can't advise you on how to make it work for your particular application.

ONLY FOR USE FOR 15" OR LARGER WHEELS!
FREE TECH SUPPORT  AVAILABLE WITH EACH KIT UPON REQUEST!

More info about the front kit:

The front disc brake kit allows an easy solution to convert your drums to disc. Everything included in one kit. This kit is designed to bolt on to your stock drum brake spindle and will not change the ride height. Your rims need to be 15" or larger or the kit will have clearance issues. Disc brake conversions typically create an offsets of 1/4" to 3/8" on each wheel.

About the Wilwood Front Calipers:

Why Wilwood? Wilwood Engineering has been one of the leading manufacturers of high quality, performance, racing, & aftermarket brake equipment since 1977. The Wilwood brand is recognized as a industry leader, and a name you can trust.

Wilwood#120-10936-RD

D52 Dual Piston Caliper

2" Diameter Pistons

1.28" Rotor Width

Wilwood's D52 caliper is a direct bolt-on 2 piston replacement for the factory original single calipers on many 1968-96 GM Passenger Vehicles and Trucks. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put and end to the rust, bore pitting, and seal failures that plague the OE caliper design. D52 brake calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track.

D52 performance brake calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE banjo bolt brake line. mounting. Calipers can be used with most wheels that clear the OE calipers. The Rear calipers with 1.25" piston provide 2.46 cubic inches of piston area per caliper, to maintain the original front to rear brake bias and use of the OE master cylinder.

About the Wilwood Master:


Additional Dimensions
Overall Length(in): 8.76"
Flange to End Length (in): 8.15"
Inlet Size (in):
Inlet Fit (in):
Outlet Size 1 (in): 1/2-20
Outlet Fit 1 (in): 3/8-24 IF or 1/2-20 IF
Outlet Size 2 (in): 1/2-20
Outlet Fit 2 (in): 3/8-24 IF or 9/16-18 IF



CHECK OUT OUR STAINLESS STEEL HOSES A $50 DOLLAR VALUE THAT COME INCLUDED IN THIS KIT! MOST EBAY LISTINGS DON'T INCLUDE THEM AND YOU WILL HAVE END UP PURCHASING SEPARATELY.

We offer free tech support with every order!!!