ELM327 wifi/Bluetooth-compatible with PIC18F25K80 chip with Supports Commands ATAL & ATPPS , with 4Mhz .

Features:
1. ELM327 is with Real PIC18F25K80 chip , stable function and longer life working

2. ELM327 is Real V1.5 Hardware , Supports Commands ATAL & ATPPS , with 4Mhz .

3. ELM327 V1.5 supports 12V Gasoline&Diesel cars with OBD2 protocol via 16pin connector .
4. Langauge :
If you works with Phone, the language depends on your phone, supports almost kinds of language in the world .
If you works with computer , the langauge ; Czech,Danish,German,English,Spanish,French,Croatian,Hungarian,Italian,Polish,Serbian,Turkish
5. ELM327 supports System : Android system phones, Symbian system phones, Windows XP and WIN7 32bite ( But it can not supports Android car radio etc )

WIFI Version：Support IOS/PC/Android -USB Version: xp,win 7,win 8 32bit system

ELM327 V1.5 Main Function :

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Clear trouble codes and turn off the MIL ("Check Engine" light)
Set the maximum number of responses to obtain
Remove spaces from ECU responses (to speed data transmission)
Store a unique identifier in EEPROM
Set the CAN mask and filter with one command
Easily switch between variable and fixed CAN message lengths
Send CAN remote frames (RTRs)

Main Functions:

• Engine RPMs
• Calculated load value
• Coolant temperature
• Fuel system status
• Vehicle speed
• Short-term fuel trim
• Long-term fuel trim
• Intake manifold pressure
• Timing advance
• Intake air temperature
• Air flow rate
• Absolute throttle position
• Oxygen sensor voltages
• Associated short term fuel trims
• Fuel system status
• Fuel pressure

AND MORE.......

Note:

Your vehicle may not support all above parameters.How many parameters you can get is depended on the vehicle manufacturer’s implementation.

Support Protocols:
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)
A.SAE J1939 CAN(29bit ID,250*Kbaud)
B.USER1 CAN(11*bit ID,125*Kbaud)
C.USER2 CAN(11*bit ID,50*kbaud)
*default settings(user adjustable)

Supported cars:

Our ELM327 works with 12 V gasoline and diesel vehicles Only.pls check car model from the list here at first .

Car model list :
1.American car support car after 1998 year
2.European car support car after 2000 year
3.Asian car support car after 2002, (Japan&Korea&China&so on)
4.Russian cars support after 2012 year (VAZ/UAZ/GAZ car)

WHY Choose V1.5 ELM327？ V1.5 Better than V 2.1

1.V 1.5 ELM327 Works with 9 protocols, including SAE-J1850 PWM , JAE J1850 VPW , V2.1 can not work.
2. V1.5 ELM327 is more stable than V2.1
3.V1.5 is More Advanced ELM327 Version

Hardware requirements:

for Android/for IOS devices(iphone,ipad e.g.)//for PC

Software Requirements:

All ELM327 based software.
- IOS system software in Apple store: Car Scanner / OBD Auto Doctor / OBD Car Doctor / EOBD Faciles / Rev / FUZZYCar/ DashComand / SpeedPORT / Nova Scan ...
Attention:For iOS base software are not included you must buy from Apple App Store!
- Android system software：Torque pro / Mini OBD2 / OBD Car Doctor / DashComand ...
- Windows system: Scanmaster- ELM / PCMSCAN...

Technical Specifications:

SSID: WiFiOBD
IP: 192.168.0.10
Subnet: 255.255.255.0
Port: 35000
Range: 50 ft (Line of sight)
Antenna: Internal
Power Consumption: 0.75 Watts
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius

How to Connect with my phone and car?

Bluetooth-compatible version(Android Phone):

1. Clear your BT connection history, find the ELM327 device , and connect it, password is : 1234 ( If Wifi version , pls choose wifi connect )

2. Open the software , and set it as the picture steps ( If Wifi version , pls choose wifi connect ) :

3. Click these two places of the picture, and wait for 30 seconds , it will connect successful .

For Wifi Version:ELM327 software installation & Display system requirement IOS 7.0-9.1

The machine system is IOS9.1 the following are the demonstration of the machine