1. When installed for the first time, AutoDAB will default to transmitting on 87.8MHz. Tune the car stereo to this frequency. 2. The car stereo display will show “AutoDAB” and the audio message “Scanning AutoDAB, please wait” will sound every five seconds to signify a successful connection. 3. Choose a preset on the car stereo and store the AutoDAB frequency to it 4. Pair the RF remote control to the AutoDAB interface by holding down the ‘Menu’ and ‘On/Off’ buttons on the remote. A short beep will be heard to confirm that pairing was successful. 5. After the initial station scan is complete, the audio message will change to ‘AutoDAB’. 6. Press ‘Menu’ to start AutoDAB. After a short delay, the car stereo will display the first available DAB station found. |