Processing diameter: 8cm
Power: 350W
Processing length 20cm
Spindle speed: 14003500r / min
Weight: 11kg
Spindle: drill chuck speed reducer spindle
Drill chuck clamping range: 1-10mm
Parts List:
Input fuse * 6
Twist drill bit * -4
Plum Thimble 2
Motor cable * 1
Output fuse * 6
Polishing shaft * 4
Elastic rope * 1
Try playing with wood * 2
Motor bracket fixing screw * 4
Hand tool holder * 1
Allen wrench * 4
Drill chuck wrench * 1
Yellow locking screw * 3
Manual turning tool 1
Power supply speed controller * 1
Threading needle crochet * 5
Product details
Woodworking household lathes can process wood 8 cm thick and 20 cm long. Front and rear drill clamps
Head clamping range 1-10mm.
The lathe double guide rail adopts 16mm hard shaft. The inner hole of the slider is precisely machined, and the gold and copper sleeves are fitted inside.
Both the main shaft and the tail drill chuck are B12 models with a clamping range of 1-10mm. Before and after
The industrial grade B12 drill chuck spindle contains two bearings and has a lock nut. Caudal
The drill chuck supports rotation, and also supports locking without rotation.
This lathe can install 75-80mm diameter saw blades. And grinding wheel, need to be purchased separately,
It is available in our shop and the saw table is under development. Because the turning tool is a white steel turning tool, there is no sharpening
Buyers need to grind their own turning tools
Power: 350W
Processing length 20cm
Spindle speed: 14003500r / min
Weight: 11kg
Spindle: drill chuck speed reducer spindle
Drill chuck clamping range: 1-10mm
Parts List:
Input fuse * 6
Twist drill bit * -4
Plum Thimble 2
Motor cable * 1
Output fuse * 6
Polishing shaft * 4
Elastic rope * 1
Try playing with wood * 2
Motor bracket fixing screw * 4
Hand tool holder * 1
Allen wrench * 4
Drill chuck wrench * 1
Yellow locking screw * 3
Manual turning tool 1
Power supply speed controller * 1
Threading needle crochet * 5
Product details
Woodworking household lathes can process wood 8 cm thick and 20 cm long. Front and rear drill clamps
Head clamping range 1-10mm.
The lathe double guide rail adopts 16mm hard shaft. The inner hole of the slider is precisely machined, and the gold and copper sleeves are fitted inside.
Both the main shaft and the tail drill chuck are B12 models with a clamping range of 1-10mm. Before and after
The industrial grade B12 drill chuck spindle contains two bearings and has a lock nut. Caudal
The drill chuck supports rotation, and also supports locking without rotation.
This lathe can install 75-80mm diameter saw blades. And grinding wheel, need to be purchased separately,
It is available in our shop and the saw table is under development. Because the turning tool is a white steel turning tool, there is no sharpening
Buyers need to grind their own turning tools