Boot Selector for Amiga 500/A500 A1500 / Amiga 2000 #08 24

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


Original images

Boot selector for AMIGA 500 / A500+ / A1500 / A2000

Original images

Boot selector for AMIGA 500 / A500+ / A1500 / A 2000


Amiga boot selector DF0: DF1:


Use the switch to activate the external floppy drive (DF1 :) as a boot device. The device drive DF1:
is then used like the internal floppy drive (DF0 :) and the internal drive is disabled.
When going back, the internal drive will be restored as DF0: boot device and the external hard drive as DF1:.
 
Compatible with Amiga Gotek devices.
Only suitable for Commodore Amiga 500, 500+, 1500 and 2000.

Installation is very simple: Remove the CIA floppy disk chip (marked 8520A) from its socket, 
insert the card in its place and insert the IC on the card.
Important note: There is a simple “trick” where you can swap both drives 
Position, it is tested and works with Workbench, 
the Xcopy utility and some games: Normally boot from the internal drive and after initializing the disc changes to "position switched". 
This way you can use both the outdoor unit as DF0 and the indoor unit as DF1





Amiga Boot selector DF0: DF1:


Use the switch to enable the external floppy drive (DF1 :) as the boot device. The DF1: device drive is then used as if it were the internal floppy drive (DF0 :) and the internal drive is disabled.
Going back restores the internal drive as DF0: boot device and the external hard drive as DF1:
 
Compatible with Amiga Gotek units.
Only suitable for Commodore Amiga 500, 500+, 1500 and 2000.

Installation is very simple: remove the CIA floppy chip (marked 8520A) from its socket and insert the card in its place and insert the IC on the card.

Important Note: There is a simple "trick" where you can use both drives in switched position, it is tested and also works with Workbench, the Xcopy utility and some games: Boot normally from the internal drive and, after initialization of the disc, changes to "Position Switched". This way you can use both the outdoor unit as DF0 and the indoor unit as DF1

Combined shipping when purchasing multiple items.

Combined shipping when purchasing multiple items.


the Xcopy utility and some games: Normally boot from the internal drive and after initializing the disc changes to "position switched".  Use the switch to enable the external floppy drive (DF1 :) as the boot device. The DF1: device drive is then used as if it were the internal floppy drive (DF0 :) and the internal drive is disabled. Installation is very simple: remove the CIA floppy chip (marked 8520A) from its socket and insert the card in its place and insert the IC on the card. Important Note: There is a simple "trick" where you can use both drives in switched position, it is tested and also works with Workbench, the Xcopy utility and some games: Boot normally from the internal drive and, after initialization of the disc, changes to "Position Switched". This way you can use both the out
Marke Commodore
Angebotspaket Nein
EAN Nicht zutreffend
Maßeinheit Einheit
Modifizierter Artikel Nein
Modell Amiga 500
Herstellungsland und -region Unbekannt
Anzahl der Einheiten 1
Herstellergarantie Keine