One 250MHZ Oscilloscope probes for Tektronix and HP Oscilloscope scope, X100 up to 2KV, 1 units + accessories
Introduction:
The new TX3100 series of passive probe has excellent price performance value, handle double absolutely. Increase safety creepage distance. bandwidth up to 250MHz, mini-box designed. Full set accessories are included with each probe. All probes meet IEC1010-2-031,1200VDC, CATII
The TX3100 series is a passive high impedance high-voltage oscilloscope probe designed and calibrated for use on instruments having an input impedance of 1Mohm shunted by 15pF.
TX3100 Series
Low Frequency Compensation Adjustment:
- Low frequency response can be matched to the oscilloscope by adjusting the compensation trimmer on the head of the probe.
- Connect the probe to the oscilloscope and to a 1Khz square waveform source
- Set the oscilloscope to display two to the three cycles and two to six vertical divisions.
- Carefully adjust the trimmer tool to obtain the flattest tops to the square waves displayed on this oscilloscope,
- High Frequency compensation adjustment
Texas P3100 Series Probes
- General Purpose, Bench or Field
- Economical, Yet High Quality
- High Input Impedance (X100 range)
- Compensation (X100 range)
Features:
- Useable with scopes having Bandwidth DC to 250 MHz
- Rise time: 1.4ns
- Interchangeable Probe Tip
- Modular Construction
- Compensation range: 10 to 50 pF
- Input Capacitance: 6.5pF
- Input Resistance: 100Mohm
- Bandwidth: 100X: 250MHz
- Net Weight: 55g
- Cable Length: 120cm
- Operating Temp: -10C-50C
- Operating Humidity: <=80%
- Maximum Input Voltage: 2000 VDC (DC+peak AC)
Model# | Attenuator | Bandwidth (-3dB) MHz | Rise-time (ns) | Compen. Range(pf) | Voltage MAX. (Note2) | Input Res. (MΩ) | Input Cap. (pf) | GND Ref |
TX3225A | X100 | 250 | 1.4 | 10-50 | 2000 | 100 | 6.5 | X |
- Full set a accessories are included with each probe.
- All probes meet IEC61010-2-031,2000VDC+pk.AC, CATII
- Cable Length:1.35m
|
The package includes:
1) One 250MHZ Oscilloscope probes with Mini Alligator Clip and ground lead;
2) 1 Screwdrivers;
3) 2 marker bands;
4) 1 tip locating sleeves.