Single Port 145 to 175 PSI Air Compressor Pressure Switch Control Valve Unloader

Product Description

A brand new 145-175 psi , 1-port air compressor pressure switch. With manual on and off lever. This switch also has a unloader on the side which does not have to be hooked up if it is not needed.

Specificaitons:

• 145-175 psi pressure setting/ Adjustable if needed.
• Has one 1/4" inch female npt air inlet port.
• A manual on and off lever
• A 1/4" inch compression thread unloader valve hook-up.
• Max amps: 20 amps at 120 volt, 12 amps at 240 volt.

Note: (When looking for a pressure switch most all switches are similar the most important things to look for when trying to find a switch that will work for you is the pressure make sure it is the same or close, you can adjust it if needed. Make sure how many air inlet ports you have some will have four so you can hook-up a gauge, relief valve, or to use as extra air outlets, and some will just have one that goes straight to the tank and those things are mounted somewhere else. If you have a one port you can use the four port pressure switches you will just have to plug the ports not used. Also if you have an unloader make sure you get a switch with an unloader valve most will be standard " compression.)