Product Information
DIRENZA PERFORMANCE HUB CENTRIC WHEEL SPACERS
Click on the Image to Enlarge
DIRENZA PERFORMANCE HUB CENTRIC WHEEL SPACERS
| SPECIFICATIONS | |
|---|---|
Bolt Pattern: |
5 x 108 |
Thread Pitch: |
M12 x 1.5 |
Thickness: |
15mm |
Centre Bore: |
63.3mm |
To give your car that perfect visual and performance touch, the engineers at Direnza have created a complete line of wheel spacers. These are designed to give your vehicle a wider, more stable stance quickly and easily. With the correct Direnza spacers installed, your car will take on a more aggressive look with wheels and tyres filling the wheel arch exactly the way they should.
Fine-tuning your track width doesn't just enhance your car's look, it also gives you improved handling, performance and optimised roll capabilities. Direnza spacers are available in a range of sizes, letting you position your tyres exactly where they will look and perform their best. All Direnza spacer kits come complete with all necessary mounting hardware.
The Direnza wheel spacer is one of the easiest and most cost effective bolt-on performance handling enhancements for your vehicle.
Common fitments (for reference only):
Ford Focus (04 - Onwards)
Ford Focus RS (09 - onwards)
Ford Mondeo (00 - 03)
Ford Mondeo (03 - 05)
Ford Mondeo (05 - 07)
Ford Mondeo (07 - onwards)
Ford Focus ST (12 - onwards)
Please note the photos shown are stock images and may differ slightly in appearance from the fitment advertised. You will receive Direnza wheel spacers for the fitment details advertised.
These are the common fitments for these spacers and intended as reference only. Please check your vehicle setup for suitability, (see glossary below) BEFORE purchase.
Before purchasing any wheel spacers please measure the gap between the outer edge of the tyre and the wheel arch. Take 5mm from this figure to help give the maximum thickness wheel spacer suitable for your vehicle. It is good practice to work to 5cm less than this figure to allow for movement in the vehicle suspension. When measuring your wheel gap always measure both the driver and passenger sides on the same axle as measurements may differ slightly and you should always work off the smaller of the two figures. This is especially important as spacers which have been fitted and / or tested cannot be returned.
Below you will find a brief glossary of terms you may encounter when checking the suitability of wheel spacers for your vehicle.
Term |
Definition |
PCD |
PCD stands for 'Pitch Circle Diameter' and is usually expressed in millimetres, (inches may also be used). For a 4 or 6 bolt fitment this measurement is the distance between the centre of two diametrically opposite bolt holes. For 5 bolt fitments measuring the diameter of an imaginary circle running through the centre of each bolt hole. |
Offset |
The offset of a vehicle's wheels is the distance between the centerline of the wheel and the plane of the hub-mounting surface. This is typically expressed in millimetres and can be either positive / negative. The offset plays a significant role in the vehicle's suspension geometry as well as dictating the distance between the tyre and suspension. Not to mention the visual gap between the wheel and the vehicle bodywork. |
Stud Pattern |
The stud / bolt pattern refers to the number of studs, (or lugs) the wheel bolts onto, and the imaginary circle the studs form. Most vehicles have either 4, 5 or 6 bolt patterns. |
Centre Bore |
The centre bore (or hub diameter) of a rim refers to the size of the centre hole in the middle of the wheel. This correlates to the diameter of the hub centre bore and is usually expressed in millimetres. |
Hub Centric |
Hub centric refers to the the the point at which the primary load of the vehicle is placed. Hub centric wheel spacers ensure less load is placed on wheel bearings and other suspension components by keeping this load on the vehicle hub. The alternative is to us 'lug centric' spacers which rely on the wheel studs to centre the wheel on the hub. Good practice for fitting spacers of thicknesses greater than 10mm is to use hub centric wheel spacers. |
Shipping Details
We are a UK based company that offer high quality performance vehicle parts and accessories at competitive prices. All our products are in stock, on the shelf and ready for shipment meaning there is no hidden import tax or other nasty suprises. The price you see is the price you pay!
All orders are carefully packaged and dispatched using only reputable courier agents to ensure your order arrives with you as quickly as possible in the best possible condition.
International Orders:
Due to rising customs charges we regret to inform our customers we are unable to ship to the following locations:
- Russia
- Northern Cyprus
- Canaries Islands
- Balearic Islands
Shipping to Islands will require more postage i.e. Sicily / Sardinia
We are able to ship to Malta however please be aware this may be subject to a surcharge. Please contact us for more details regarding this.
Please be aware we will not be held responsible for any customs charges or other additional fees. If you are unsure whether such fees will apply please don't hesitate to contact us before placing your order. If you refuse to pay customs or other charges due on your order please note any refund provided will be less the total additional + any shipping costs for the return of your order to us.
Please be aware that we strongly advise all items are installed by a qualified auto mechanic. Any parts not installed professionally will NOT be covered under our specified warranty or returns policy. We will NOT be held responsible for any labour or other garage fees.
Payment Details
Returns Policy
We aim to process returns within 48 business hours of receipt of the return, but please allow up to 7 days for any exchange / refund. If you are unhappy with your purchase for any reason, you can return item to us in an un-used state in the original packaging within 14 days of purchase and we'll give you a refund or exchange minus postage costs. Any returns after this time may be subject to a restocking fee. Please note you MUST contact us for a returns form and returns number before returning any part. This way your return can be logged and processed promptly once it arrives back.
