THIS LISTING IS FOR THE Performance "P3" KIT FROM Raven Eye Custom:

 

1 BLUED ALLOY STEEL HEX HEAD TAKEDOWN KIT

1 BOLT BUFFER

1 PACKAGE (1 PAIR) OVERSIZED TRIGGER GUARD PINS

1 PACKAGE (1 PAIR) REPLACEMENT V-BLOCK SCREWS

 

FOR THE COMPLETE BREAKDOWN OF ALL 14 PARTS INCLUDED, See below...

 

Buy together and save!  Also save on shipping!

 

Regular price for the three = $7.79 + $6.99 + $7.39 + $9.89 = $32.06

Shipping if bought separately = $3.27 + $3.27 + $3.27 +$3.27 = $13.08

Total price if bought separately = $45.12

 

Listing price = $28.99 with FREE SHIPPING! 

You save $16.13 (36% off!!) !!



IF YOU CATCH THIS ITEM ON SALE, YOU HAVE THE CHANCE TO SAVE EVEN MORE!

 

 

FOR A LIMITED TIME, 10% of your purchase will go directly to the Red Cross, to help with disaster relief worldwide.

 

CONTENTS:

1 - BLUED ALLOY STEEL hex head takedown screw for the Ruger 10/22

1 - Bolt buffer

2 - Oversized trigger guard pins

1 - 1/8" hex wrench for installing takedown screw

2 - V-Block screws

1 - 5/32" hex wrench for removing factory v-block screws

3 - Vibration dampening rings to use in conjunction with the takedown screw (use optional)

3 - Dummy Rounds in 22LR (use as a safety device)

1 - Set of complete installation instructions

 

(SEE PHOTOS FOR DETAILS OF THE PARTS)

 

SATISFACTION GUARANTEED!

 

 

I HAVE 100% POSITIVE FEEDBACK FOR ONE MAIN REASON - I DEAL IN HONESTY

 

ALSO - LOOK AT MY RECENT FEEDBACK.  I SHIP FAST !!

 

Make sure and look at my other listings for other high quality parts for the Ruger 10/22 and Smith and Wesson MP15-22, as well as items of interest for rimfire enthusiasts.

 

( THIS KIT IS ALSO AVAILABLE WITH A TITANIUM OR STAINLESS TAKEDOWN SCREW.  SEE MY OTHER LISTINGS FOR DETAILS )

 

 

RAVEN EYE CUSTOM STAINLESS STEEL V-BLOCK SCREW KIT

 

What is the purpose for replacing the factory v-block screws (barrel retaining screws)?

 

Þ            The shoulder of the screw is custom sized to match the V-Block, which helps the v-block remain straight, and more uniformly transfers forces

Þ                  The size of the hex socket has been reduced to help prevent over-torque, a condition that leads to inconsistent barrel / action harmonics

 

             There is an ideal torque, and tightening too much will damage the receiver and create uneven stresses.  Most feel that tighter is better, but this is not true! 

             The smaller hex wrench is sized to limit the maximum torque, which should not be more than 25 in-lb.

 

Þ            Hex sockets allow for consistent, repeatable torque

Þ          Stainless steel will not corrode or pit, the factory steel can

 

 

RAVEN EYE CUSTOM BLUED ALLOY STEEL TAKEDOWN SCREW KIT

 

Simply the best upgrade for the Ruger 10/22 !

 

 

Adds a high end custom look to aftermarket or factory stocks.  Fits all brands including Boyd's, Revolution, Fajen, Bell and Carlson,

as well as many others. 

 

 

Compare to other listings.  I have included many extras that I have learned are very useful for 10/22 owners.  Our company only sells parts for the 10/22, and we know it very well! 

 

The vibration dampening rings can help prevent compression of the stock by reducing accuracy affecting pressures on the action and barrel.  You only use one at a time, but I know these can wear out over time, so I have included several. 

 

The 22LR dummy rounds are essential for safety, for diagnosing testing feeding, loading, or trigger problems.  They are not ammunition, but you can "dry fire" with them safely. 

 

 

 

Why is a hex socket takedown screw one of the

most common upgrades for the Ruger 10-22?

 

Þ          The deep hex socket allows for more consistent torque

Þ                    Factory takedown screws require a flat head screwdriver

       which often slips and can damage the stock.

       Hex sockets do not slip.

Þ          Vibration dampening rings allow for individual

       customization of fit (use optional)

Þ          Compliments aftermarket stocks

 

 

 

How is the Raven Eye Custom Takedown Screws Kit different

from the others available?

 

Þ     The Raven Eye Custom product is a “Kit”, not just a screw.  It includes

  many extras that are not included in the other brands such as the vibration

  dampening rings and the snap caps.

Þ     The length of the screw has been maximized to provide the most stability

while preventing contact between the barrel and the takedown screw.

 

  

Other vendors offer a T-handle hex driver together with their takedown screw. 

 

I considered offering one, and here is the reasons that I included a basic hex wrench instead:

Reason #1:  The T-handle and a simple hex wrench will do the same job of providing a consistent torque to the takedown screw.

 

Reason #2:  In order to include a T-handle wrench in my kits, I would need to raise the price of the kit.  Instead of raising the price, I reasoned

it is better to let the consumer decide if they want the fancy wrench which they can buy on their own for about $1.25. 

 

A Common Question:  Will I have to drill out or otherwise modify my factory escutcheon to

use this product?  Absolutely not.   This part is a "DROP IN PART" that requires no work other

than unscrewing the old takedown screw, and screwing in the new.

 

BEWARE OF OTHER LISTINGS THAT SELL FULLY THREADED TAKEDOWN SCREWS!!  The factory Ruger ones, like the Raven Eye Custom screws,

are partially threaded.  If you use a fully threaded screw, YOU WILL DAMAGE THE THREADS IN THE ACTION AND THE ESCUTCHEON.

 

 

 

RAVEN EYE CUSTOM BOLT BUFFER

 

 

What is a bolt (or recoil) buffer and why is it one of the

most common upgrades for the Ruger ten twenty-two?

 

Þ           The factory Ruger 10/22 bolt buffer is made of steel.  Its purpose is to stop the bolt

  after the semi-automatic action has been reset.  It works well but has its disadvantages.

Þ           The Raven Eye Custom Bolt Buffer is made of an engineered urethane designed to

  dissipate the energy from the bolt impact.  The result is a reduction in noise and recoil.

Þ           While I would not consider the 10/22 to be loud or a gun or one with a lot of recoil, the

  effect of having the bolt buffer in place is significant.  Ask around, it is almost a universally upgraded component.

Þ           Bolt buffers increase the longevity of optics due to the reduction in shock

Þ           Installing the bolt buffer can be done in around 2 minutes.  This area of the rifle is

  accessible by simply removing the takedown screw and lifting the stock off. 

  That’s it!  No gunsmith required!

 

How are the Raven Eye Custom Bolt Buffers different from the others available?

 

Þ          The Raven Eye Custom product is the result of months of testing.  The engineered bolt

              buffer doesn’t just work well, it excels. 

Þ           The bolt buffers are custom fabricated in the USA, not imported.

Þ           The buffer will outlast you.  These don't need to be replaced every so often like the others.  If it ever does (hasn't

           happened yet) - we will replace it free of charge.

Þ           Finally, with this product you also get snap caps in 22LR.

 

 

 

FREQUENTLY ASKED QUESTIONS:

1.  Is this RED buffer visible from the assembled stock? 

No.  The bolt buffer is only visible when the stock is removed.  The only exception is on the Barracuda style aftermarket stock (not the factory stock), where some types may show some of the bolt buffer. 

 

2.  Is this part hard to replace?

The process involves removing a single screw and replacing the existing bolt stop pin with the new bolt buffer.  It can be done in around 2 minutes, and does not require a gunsmith.

 

 

RAVEN EYE CUSTOM OVERSIZED TRIGGER GROUP PINS

 

Why should the trigger guard pins (part B-5) be replaced on the Ruger 10/22?

 

Þ                    Replacement pins are oversized 0.001" to more securely attach the

  trigger group assembly to the action

Þ                    Factory pins are designed for easy removal, not for a secure attachment

Þ                    A more secure attachment eliminates the slight rotation between the action and the trigger group that improves accuracy by improving the quality of the trigger pull.

Þ                    With the installed pins, when the trigger is pulled, some of the “mush” in the trigger pull is eliminated making it more crisp

Þ                    Stainless pins will not corrode or rust

Þ                    No gunsmith required for replacement

 

 

A Common Question:  Are these pins hard to replace?  No.  You only need to remove the takedown screw, and usually the factory pins fall out

on their own.  Insert the new pins and replace the takedown screw.  That's it.

 

 

Who is Raven Eye Custom?

 

From the owner:

 

“Raven Eye Custom products were initially designed for use in high end custom target rifles. 

Not until recently were these made available as individual components.  1022 Armory is one

of the first retailers to begin offering our line of products.

 

The goal of Raven Eye Custom LLC is to make affordable products that are of excellent quality. 

Rimfire perfected!

 

The oversized trigger group pins come with a lifetime guarantee for the original purchaser.  The product will be replaced if it ever wears out or fails to be “excellent”.  Simply return the part to the

address posted on the packaging. 

 

 

Check out my other items!

Be sure to add me to your favorites list!  You can receive emails on sales and accurizing techniques! 

Shipping will be via USPS, First Class. 

Your items will be dropped off at the post office within 48 hours of payment. 

First class mail usually takes 2-5 days from shipment to arrive.  We ship to your address listed with Paypal unless you tell us otherwise.

 

We can ship international, there is a $4 surcharge to cover the additional paperwork involved.  Please email first if you are an international customer looking to purchase any items. 

If you live in Colorado, we must collect the state and local sales tax rate of 7.6%.  This only applies to Colorado.

 

Our feedback is 100% positive for one reason - we deal in honesty.  We take care of our customers!

WE SHIP FAST!  LOOK AT RECENT FEEDBACK FOR PROOF!

WE SHIP OUR PRODUCTS IN PADDED MAILERS, NOT STANDARD ENVELOPES LIKE OTHERS DO. 

Postal sorting equipment damages hard goods placed in standard envelopes.  OURS WILL ARRIVE SAFELY.

 

 

SATISFACTION GUARANTEED!

 

 

 

 

ATTENTION EBAY:

The products above are in full compliance with your firearms policy.  None of the above products are firing control parts or otherwise required to make a firearm operate.  The snap caps are plastic pieces that are not ammunition.  They are only used as a safety device.

FREE SHIPPING ON THIS ITEM!